AP2142SG-13
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 850.995985mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Current Rating | 800mA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2142 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Turn On Time | 50 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 120m Ω |
| Turn Off Time | 10 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height | 1.5mm |
| Length | 4.95mm |
| Width | 3.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 18 Weeks |
AP2142SG-13 Overview
It is package in Tape & Reel (TR) case.It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.Mounting type Surface Mount is selected for the LED driving board.It owns USB Switch switch type.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.The lighting driver has a total of 2 outputs that are available for use.A supply voltage of Not Required is required for it to operate.Voltage output is P-Channel volts at maximum.As far as features are concerned, the LED driving board has Status Flag.The AP2142 family consists of this type.As a result, there are 8 terminations.During operation, the 8 pins are used.There are 2 functions of the LED driver.The maximum output current drops to 500mA in order to meet the operation criteria.As long as the supply voltage is 5V, high efficiency can be achieved.Surface Mount is mounted in the way of this LED driving board.In total, it has 8 pins.120mOhm resistance is present in the lighting driver.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.This part has a power supply of 3/5V volts.Voltage input is limited to 5.5V volts.The input voltage minimum is 2.7V volts.
AP2142SG-13 Features
Supplied from 5V
Resistance of 120mOhm
AP2142SG-13 Applications
There are a lot of Diodes Incorporated AP2142SG-13 Power Switches ICs applications.
- Portable Music Players
- HDD, SSD
- Telecom and Network Systems
- Set-Top Boxes
- Hard Disk Drives
- Handheld Devices
- USB Ports/Hubs
- USB Power Distribution
- Wearable Devices
- Various applications equipped with buttons