| Parameters |
| Contact Plating |
Copper, Silver, Tin |
| Package / Case |
684-BFBGA, FCBGA |
| Surface Mount |
YES |
| Number of Pins |
684 |
| Operating Temperature |
0°C~90°C TJ |
| Packaging |
Tray |
| Series |
Sitara™ |
| JESD-609 Code |
e1 |
| Pbfree Code |
no |
| Part Status |
Obsolete |
| Moisture Sensitivity Level (MSL) |
4 (72 Hours) |
| Number of Terminations |
684 |
| ECCN Code |
3A991.A.2 |
| Terminal Finish |
Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code |
8542.31.00.01 |
| Subcategory |
Microprocessors |
| Technology |
CMOS |
| Terminal Position |
BOTTOM |
| Terminal Form |
BALL |
| Peak Reflow Temperature (Cel) |
250 |
| Supply Voltage |
1.35V |
| Terminal Pitch |
0.8mm |
| Frequency |
800MHz |
| Base Part Number |
AM3874 |
| Pin Count |
684 |
| Power Supplies |
0.95/1.35V |
| Voltage |
1.42V |
| uPs/uCs/Peripheral ICs Type |
MICROPROCESSOR |
| Core Processor |
ARM® Cortex®-A8 |
| Bit Size |
32 |
| Data Bus Width |
32b |
| Address Bus Width |
28 |
| Core Architecture |
ARM |
| Boundary Scan |
YES |
| Low Power Mode |
YES |
| Format |
FLOATING POINT |
| Integrated Cache |
YES |
| Voltage - I/O |
1.8V 3.3V |
| Number of UART Channels |
6 |
| Ethernet |
10/100/1000Mbps (1) |
| Number of Cores/Bus Width |
1 Core 32-Bit |
| Graphics Acceleration |
Yes |
| RAM Controllers |
DDR2, DDR3 |
| USB |
USB 2.0 (2) |
| Additional Interfaces |
CAN, I2C, McASP, McBSP, SPI, MMC/SD/SDIO, UART |
| Co-Processors/DSP |
Multimedia; NEON™ SIMD |
| Display & Interface Controllers |
HDMI, HDVPSS |
| SATA |
SATA 3Gbps (1) |
| Length |
23mm |
| Radiation Hardening |
No |
| RoHS Status |
ROHS3 Compliant |
| Lead Free |
Contains Lead |
AM3874BCYE80 Overview
The microprocessor is convenient for international shipping since it is packaged in 684-BFBGA, FCBGA. High reliability is achieved with advanced packaging method Tray. A CPU with 1 Core 32-Bit cores and width 1 Core 32-Bit busses is used. Be aware of the operating temperature around 0°C~90°C TJ. Sitara? is its series number. The CPU is cored with a ARM? Cortex?-A8 processor. DDR2, DDR3 RAM controllers are used by this CPU. Featuring CAN, I2C, McASP, McBSP, SPI, MMC/SD/SDIO, UART interfaces, this microprocessor can better serve you. In this CPU, I/O is set to 1.8V 3.3V. This is a MICROPROCESSOR for the uPs/uCs/Peripheral ICs type. You can search for variants of a microprocessor with AM3874. There are 684 terminations totally. Turning on and running the embedded microprocessor with a 1.35V voltage supply should be possible. The architecture of the microprocessor is 32-bit. At 800MHz, the CPU operates. The datasheets for 684 pins provide details. The embedded microprocessor is a typical Microprocessors. Generally, data transfer takes place at a rate of 32b bandwidth. The CPU microprocessor body is injected with 684 pins. The datasheet specifies that this CPU microprocessor requires 0.95/1.35V power supply. The CPU core voltage is 1.42V. This embedded microprocessor has 6 UART (Universal Asynchro6us Receiver/Transmitter) channels
AM3874BCYE80 Features
ARM? Cortex?-A8 Core
32-Bit Structure
32b-Bit Data Bus Width
AM3874BCYE80 Applications
There are a lot of Texas Instruments AM3874BCYE80 Microprocessor applications.
- Magnetic resonance imaging (MRI)
- Coffee machines
- Office automation equipment and computer peripherals
- Smart highways (navigation, traffic control, information monitoring and car service)
- Virtual reality VR robots
- Consumer electronics products
- Temperature sensing and controlling devices
- Equipment control
- Safety field
- Volt meter