ALD7556PBL
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Supplier Device Package | 14-PDIP |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2010 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | 555 Type, Timer/Oscillator (Dual) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Max Power Dissipation | 600mW |
| Voltage - Supply | 2V~10V |
| Frequency | 2.5MHz |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 100μA |
| Current - Supply | 100μA |
| Number of Timers/Counters | 2 |
| RoHS Status | ROHS3 Compliant |
ALD7556PBL Overview
It is enclosed in the 14-DIP (0.300, 7.62mm) packaging along with the digital timer. A frequency of 2.5MHz is set for the programmable timer.It is used to pack in Tube case. Type Through Hole is recommended for mounting.The programmable timer can supply a voltage of 2V~10V. The type of chips can be divided into 555 Type, Timer/Oscillator (Dual). The operating temperature of this timer clock is 0°C~70°C. To mount this digital timer with Through Hole. To keep the clock timer's supply current at 100μA. The operating supply voltage is rated at 100μA voltage. The minimum operating temperature of the chip must not be lower than 0°C. It's best to use the timer clock when the temperature is below 70°C. The timer clock contains 14 pins. The minimum supply voltage of the chip must not be lower than 2V. The supply voltage of this chip should not exceed 10V. The number of Timers/Counters on the device is 2.
ALD7556PBL Features
Operate frequency at 2.5MHz
Package / Case: Tube
Mounting Type:Through Hole
Current - Supply：100μA
Max Operating temperature at 0°C
2 Timers/Counters
ALD7556PBL Applications
There are a lot of Advanced Linear Devices Inc. ALD7556PBL Programmable Timers & Oscillators applications.
- Remote Data-Logger
- Battery Powered Systems
- Clutch Actuator circuit
- Delay circuits
- Internet of Things (IoT)
- Smart Key
- Power-Gating Applications
- Power-On Reset Timer
- High Vibration, High Acceleration Environments
- Consumer Electronics