ALD4501SEL

ALD4501SEL Overview

In the packaging, the clock timer is enclosed with the 20-SOIC (0.295, 7.50mm Width) code on the back. 2MHz sets the frequency of the programmable timer.It is used to pack in Tube case. Mounting type Surface Mount is recommended.It is possible to supply a voltage of 2V~12V through the programmable timer.The type of chips can be divided into 555 Type, Timer/Oscillator (Quad). The operating temperature of this timer clock is 0°C~70°C. To mount this digital timer with Surface Mount. To keep the clock timer's supply current at 150μA. The operating supply voltage is rated at 150μA voltage. The minimum operating temperature of the chip must not be lower than 0°C. It's best to use the timer clock when the temperature is below 70°C. The timer clock contains 20 pins. The minimum supply voltage of the chip must not be lower than 2V. The supply voltage of this chip should not exceed 12V. The number of Timers/Counters on the device is 4.

ALD4501SEL Features

Operate frequency at 2MHz
Package / Case: Tube
Mounting Type:Surface Mount
Current - Supply：150μA
Max Operating temperature at 0°C
4 Timers/Counters

ALD4501SEL Applications

There are a lot of Advanced Linear Devices Inc. ALD4501SEL Programmable Timers & Oscillators applications.

• Building Automation
• Periodic “Wake-Up” Call
• Smart Key
• Always On Systems
• Long Time One Shot
• High Vibration, High Acceleration Environments
• Domestic appliances
• Battery Powered Systems
• Internet of Things (IoT)
• Sensor Node