ALD4303ASBL

ALD4303ASBL

Surface Mount Tube 60mA mA 6.5 μs μs Linear Comparators 100dB dB 1nA pA 2005 90μA μA 5mV mV Surface Mount


  • Manufacturer: Advanced Linear Devices Inc.
  • Origchip NO: 16-ALD4303ASBL
  • Package: 14-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 691
  • Description: Surface Mount Tube 60mA mA 6.5 μs μs Linear Comparators 100dB dB 1nA pA 2005 90μA μA 5mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 8 Weeks
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-SOIC (0.154, 3.90mm Width)
Number of Pins 14
Supplier Device Package 14-SOIC
Operating Temperature 0°C~70°C
Packaging Tube
Published 2005
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Type General Purpose
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Max Power Dissipation 600mW
Output Type CMOS, NMOS, Open-Drain, TTL
Number of Elements 4
Number of Channels 4
Max Supply Voltage 12V
Min Supply Voltage 3V
Nominal Supply Current 90μA
Output Current 60mA
Max Supply Current 90μA
Quiescent Current 90μA
Response Time 6.5 μs
Voltage - Supply, Single/Dual (±) 3V~10V ±1.5V~5V
Output Current per Channel 60mA
Input Offset Voltage (Vos) 5mV
Voltage Gain 100dB
Max Input Current 30pA
Input Bias Current 1nA
Current - Quiescent (Max) 90μA
Voltage - Input Offset (Max) 5mV @ 5V
Current - Input Bias (Max) 30pA @ 5V
Current - Output (Typ) 60mA @ 5V
RoHS Status ROHS3 Compliant

ALD4303ASBL Overview


To facilitate transportation, it comes packaged in 14-SOIC (0.154, 3.90mm Width) .Output type of this comparator is CMOS, NMOS, Open-Drain, TTL .This device is designed in Tube case.Speaking of types, this is a typical General Purpose comparator.A total of 4 elements can be found in it.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.There are 14 pins on the comparator.A quiescent current of 90μA is observed in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.For normal use of the device, the nominal supply current should be 90μA .A current supply greater than 90μA may cause the comparator to malfunction.Electronic comparator is possible to input a maximum of 30pA current into the device.The voltage gain of the part is indicated by 100dB in the voltage formula.An increase in temperature over 70°C is not recommended.Comparator electronics is not suComparator electronicsable for temperatures below 0°C .A comparator's maximum supply voltage is 12V .This comparator allows minimum supply voltage of 3V .For the output to be of high quality, 4 channels must cooperate together.

ALD4303ASBL Features


CMOS, NMOS, Open-Drain, TTL output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 90μA
Voltage Gain: 100dB

ALD4303ASBL Applications


There are a lot of Advanced Linear Devices Inc. ALD4303ASBL linear comparators applications.

  • Wearable Devices
  • Pulse, Squarewave, and Time Delay Generators
  • Simple Analog-to-Digital Converters (ADCs)
  • Window Comparators
  • Consumer Medical Electronics
  • Lithium ion battery monitoring
  • Power management
  • Body Control Modules
  • Limit Comparators
  • Laptop Computers

Write a review

Note: HTML is not translated!
    Bad           Good