ALD4302SBL
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Supplier Device Package | 14-SOIC |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | General Purpose |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Max Power Dissipation | 600mW |
| Output Type | CMOS, NMOS, Push-Pull, TTL |
| Number of Elements | 4 |
| Number of Channels | 4 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.5V |
| Nominal Supply Current | 1mA |
| Output Current | 60mA |
| Max Supply Current | 1mA |
| Quiescent Current | 1mA |
| Response Time | 400 ns |
| Voltage - Supply, Single/Dual (±) | 4V~10V ±2V~5V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 10mV |
| Max Input Current | 1nA |
| Input Bias Current | 200pA |
| Current - Quiescent (Max) | 1mA |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| Current - Input Bias (Max) | 0.001μA @ 5V |
| Current - Output (Typ) | 60mA |
| RoHS Status | ROHS3 Compliant |
ALD4302SBL Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.Output type CMOS, NMOS, Push-Pull, TTL is used for this comparator.The part is shipped by Tube .In terms of type, this is a typical General Purpose comparator.Electronic comparator consists of 4 elements in total.In general, mounting type Surface Mount is recommended.As a precaution, it is recommended to set the operating temperature to 0°C~70°C to prevent malfunctions.The comparator has a pin count of 14 .A quiescent current of 1mA is observed in this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .For normal use of the device, the nominal supply current should be 1mA .A current supply greater than 1mA may cause the comparator to malfunction.Electronic comparator is possible to input a maximum of 1nA current into the device.Temperature higher than 70°C is not recommended.Comparator electronics cannot be used at a temperature below 0°C .Compatibility is defined as 6V when the comparator is operating at its maximum supply voltage.A minimum supply voltage of 1.5V is allowed for this comparator.As a result, 4 channels work together to maintain the quality of the output.
ALD4302SBL Features
CMOS, NMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 1mA
ALD4302SBL Applications
There are a lot of Advanced Linear Devices Inc. ALD4302SBL linear comparators applications.
- Window Comparators
- Battery-Powered Electronics
- Analog front end
- Automotive
- Handheld Instruments
- Ultra-Low Power Systems
- Mobile Phones and Tablets
- Simple Analog-to-Digital Converters (ADCs)
- Set Top Boxes
- Portable Battery Monitoring