ALD4302ASBL

ALD4302ASBL

Surface Mount Tube 60mA mA 400 ns μs Linear Comparators 200pA pA 2005 1mA μA 5mV mV Surface Mount


  • Manufacturer: Advanced Linear Devices Inc.
  • Origchip NO: 16-ALD4302ASBL
  • Package: 14-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 281
  • Description: Surface Mount Tube 60mA mA 400 ns μs Linear Comparators 200pA pA 2005 1mA μA 5mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 8 Weeks
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-SOIC (0.154, 3.90mm Width)
Number of Pins 14
Supplier Device Package 14-SOIC
Operating Temperature 0°C~70°C
Packaging Tube
Published 2005
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Type General Purpose
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Max Power Dissipation 600mW
Output Type CMOS, NMOS, Push-Pull, TTL
Number of Elements 4
Number of Channels 4
Max Supply Voltage 6V
Min Supply Voltage 1.5V
Nominal Supply Current 1mA
Output Current 60mA
Max Supply Current 1mA
Quiescent Current 1mA
Response Time 400 ns
Voltage - Supply, Single/Dual (±) 4V~10V ±2V~5V
Output Current per Channel 60mA
Input Offset Voltage (Vos) 5mV
Max Input Current 1nA
Input Bias Current 200pA
Current - Quiescent (Max) 1mA
Voltage - Input Offset (Max) 5mV @ 5V
Current - Input Bias (Max) 0.001μA @ 5V
Current - Output (Typ) 60mA
RoHS Status ROHS3 Compliant

ALD4302ASBL Overview


A convenient transport package is provided in 14-SOIC (0.154, 3.90mm Width) .A comparator with a CMOS, NMOS, Push-Pull, TTL output is used here.As a result, it is designed with Tube package.The type of the chip can be classified as General Purpose .This is a 4 element comparator.Electronic comparator is recommended to mount using type Surface Mount .As a precaution, it is recommended to set the operating temperature to 0°C~70°C to prevent malfunctions.There are 14 pins on the comparator.This comparator presents a quiescent current of 1mA .There is a Surface Mount for mounting it on a PCB or other board.Normal use of the device should require a nominal supply current of 1mA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 1mA .You are allowed to input a maximum current of 1nA into the device.An increase in temperature over 70°C is not recommended.Temperatures below 0°C are not suitable for the device.6V is the maximum supply voltage of the comparator.A minimum supply voltage of 1.5V is permitted for this comparator.In order to maintain the quality of the output, 4 channels cooperate together.

ALD4302ASBL Features


CMOS, NMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 1mA

ALD4302ASBL Applications


There are a lot of Advanced Linear Devices Inc. ALD4302ASBL linear comparators applications.

  • Power management
  • Metering Systems
  • High-Speed Differential Line Receiver
  • Pulse, Squarewave, and Time Delay Generators
  • Factory automation & control
  • Security Detection Systems
  • General-Purpose, Low-Voltage Applications
  • Wide Range VCO; MOS Clock Timers
  • Handheld Instruments
  • Self-diagnostics

Write a review

Note: HTML is not translated!
    Bad           Good