ALD4301APBL
| Parameters | |
|---|---|
| Voltage - Supply, Single/Dual (±) | 3V~10V ±1.5V~5V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 103.52dB |
| Input Bias Current | 30pA |
| Current - Quiescent (Max) | 350μA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 30pA @ 5V |
| Current - Output (Typ) | 60mA @ 5V |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 8 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Supplier Device Package | 14-PDIP |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | General Purpose |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Max Power Dissipation | 600mW |
| Output Type | CMOS, NMOS, Open-Drain, TTL |
| Number of Elements | 4 |
| Number of Channels | 4 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 350μA |
| Output Current | 60mA |
| Max Supply Current | 350μA |
| Quiescent Current | 350μA |
| Response Time | 650 ns |
ALD4301APBL Overview
A convenient packaging is provided in the form of 14-DIP (0.300, 7.62mm) .There is a comparator of type CMOS, NMOS, Open-Drain, TTL output on this device.The part is shipped by Tube .Electronic comparator is possible to classify the chip as General Purpose .This element consists of 4 elements in total.Electronic comparator is recommended that the mounting type be Through Hole .As a precaution, it is recommended to set the operating temperature to 0°C~70°C to prevent malfunctions.14 pins are present on the comparator.There is a quiescent current of 350μA in this comparator.The PCB or other board has a Through Hole for mounting.Electronic comparator is recommended that the nominal supply current of the device be 350μA .If the current supply exceeds 350μA , the comparator might be damaged.Based on the voltage formula, the voltage gain of the part is 103.52dB .An increase in temperature over 70°C is not recommended.Temperatures below 0°C are not suitable for the device.The comparator has a maximum supply voltage of 12V .A minimum supply voltage of 3V is permitted for this comparator.To ensure a high level of output quality, 4 channels work together.
ALD4301APBL Features
CMOS, NMOS, Open-Drain, TTL output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 350μA
Voltage Gain: 103.52dB
ALD4301APBL Applications
There are a lot of Advanced Linear Devices Inc. ALD4301APBL linear comparators applications.
- Mobile Communications
- Zero-Crossing Detectors
- Power Supervision
- Ultra-Low Power Systems
- Hand-Held Electronics
- Self-diagnostics
- Pulse, Squarewave, and Time Delay Generators
- Notebooks and PDAs
- Wide Range VCO; MOS Clock Timers
- Handheld Instruments