ALD2332PAL
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2010 |
| Series | EPAD® |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | General Purpose |
| Max Power Dissipation | 600mW |
| Reach Compliance Code | unknown |
| Pin Count | 8 |
| Output Type | CMOS, NMOS, Push-Pull, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 500μA |
| Output Current | 50mA |
| Max Supply Current | 500μA |
| Quiescent Current | 500μA |
| Response Time | 2.4 μs |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 4V~10V ±2V~5V |
| Input Offset Voltage (Vos) | 2mV |
| Voltage Gain | 103.52dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Input Bias Current | 20pA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 20pA @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR, 75dB PSRR |
| Current - Output (Typ) | 50mA @ 5V |
| RoHS Status | ROHS3 Compliant |
ALD2332PAL Overview
A convenient packaging is provided in the form of 8-DIP (0.300, 7.62mm) .A comparator with an output type of CMOS, NMOS, Push-Pull, TTL is being used.As a result, it is designed with Tube package.It's a typical General Purpose comparator.Electronic comparator has a total of 2 elements.Electronic comparator includes 8 pins.Electronic comparator is recommended that you mount the device using type Through Hole .The operating temperature should be set to 0°C~70°C to avoid mal-function.There is a quiescent current of 500μA in this comparator.A Through Hole is provided for mounting it onto a PCB or another board.Normally, the nominal supply current should be 500μA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 500μA .The voltage gain of the part is indicated by 103.52dB in the voltage formula.The part is from EPAD? comparator series.
ALD2332PAL Features
CMOS, NMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 500μA
Voltage Gain: 103.52dB
ALD2332PAL Applications
There are a lot of Advanced Linear Devices Inc. ALD2332PAL linear comparators applications.
- Wireless Base Stations
- Zero-Crossing Detectors
- Wearable Devices
- DC/DC and AC/DC power supplies
- Zero-Crossing Detectors
- Battery-Powered Electronics
- Simple Analog-to-Digital Converters (ADCs)
- Mobile Phones and Tablets
- General Purpose Low Voltage Applications
- Factory automation & control