ALD2321SCL
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2004 |
| Series | EPAD® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | General Purpose |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Max Power Dissipation | 600mW |
| Output Type | CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 180μA |
| Output Current | 50mA |
| Max Supply Current | 180μA |
| Quiescent Current | 180μA |
| Response Time | 2.4 μs |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 4V~10V ±2V~5V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 1mV |
| Input Bias Current | 20pA |
| Current - Quiescent (Max) | 180μA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 20pA @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR, 75dB PSRR |
| RoHS Status | ROHS3 Compliant |
ALD2321SCL Overview
To facilitate transportation, it comes packaged in 16-SOIC (0.154, 3.90mm Width) .The comparator has a type CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL output.As a result, it is designed with Tube package.In terms of type, this is a typical General Purpose comparator.This is a 2 element comparator.The recommended mounting type is Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.The comparator consists of 16 pins.The comparator presents a quiescent current of 180μA volts.The PCB or other board can be mounted using the Surface Mount on it.Electronic comparator is recommended that the nominal supply current for the device be set to 180μA .A supply current exceeding 180μA may result in the comparator malfunctioning.Keeping the temperature below 70°C is not recommended.Comparator electronics will not be able to function at temperatures below 0°C .A comparator's maximum supply voltage is 10V volts.A minimum supply voltage of 3V is permitted for this comparator.The output quality of 2 channels is maintained by cooperating with each other.A comparator part from the EPAD? series is used in this part.
ALD2321SCL Features
CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 180μA
ALD2321SCL Applications
There are a lot of Advanced Linear Devices Inc. ALD2321SCL linear comparators applications.
- Portable Battery Monitoring
- Threshold Detectors
- General-Purpose, Low-Voltage Applications
- General-Purpose Portable Devices
- Power management
- Infotainment and Clusters
- Battery-Powered Electronics
- Mobile Communications
- Window Comparators
- Factory automation & control