ALD2321BPCL
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Supplier Device Package | 16-PDIP |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2004 |
| Series | EPAD® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | General Purpose |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Max Power Dissipation | 600mW |
| Output Type | CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 180μA |
| Output Current | 50mA |
| Max Supply Current | 180μA |
| Quiescent Current | 180μA |
| Response Time | 1.1 μs |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 4V~10V ±2V~5V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 500μV |
| Max Input Current | 20pA |
| Input Bias Current | 20pA |
| Current - Quiescent (Max) | 180μA |
| Voltage - Input Offset (Max) | 0.5mV @ 5V |
| Current - Input Bias (Max) | 20pA @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR, 75dB PSRR |
| RoHS Status | ROHS3 Compliant |
ALD2321BPCL Overview
To facilitate transportation, it comes packaged in 16-DIP (0.300, 7.62mm) .The comparator has a CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL output.The part is shipped by Tube .Speaking of types, this is a typical General Purpose comparator.There are a total of 2 elements in it.Electronic comparator is recommended that you mount the device using type Through Hole .The operating temperature should be set to 0°C~70°C to avoid mal-function.This comparator has 16 pins.There is 180μA current flowing in this comparator.A Through Hole is provided for mounting it onto a PCB or another board.Normal operation of the device requires a nominal supply current of 180μA .A supply current exceeding 180μA may result in the comparator malfunctioning.Electronic comparator is possible to input a maximum of 20pA current into the device.Temperatures above 70°C are not recommended.Temperatures below 0°C are not suitable for the device.A comparator is designed to operate at a maximum supply voltage of 10V .This comparator can be supplied with a voltage as low as 3V .As a result, 2 channels work together to maintain the quality of the output.Comparator electronics is a comparator part from the EPAD? series.
ALD2321BPCL Features
CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 180μA
ALD2321BPCL Applications
There are a lot of Advanced Linear Devices Inc. ALD2321BPCL linear comparators applications.
- RC Timers
- Mobile Communications
- Set Top Boxes
- Appliances
- Motor drives
- System control and monitoring
- High-Speed Differential Line Receiver
- High-Speed Sampling Circuits
- Infotainment and Clusters
- Threshold Detectors