ALD2321APCL
| Parameters | |
|---|---|
| Voltage - Supply, Single/Dual (±) | 4V~10V ±2V~5V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 200μV |
| Max Input Current | 20pA |
| Input Bias Current | 20pA |
| Current - Quiescent (Max) | 180μA |
| Voltage - Input Offset (Max) | 0.2mV @ 5V |
| Current - Input Bias (Max) | 20pA @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR, 75dB PSRR |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 8 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Supplier Device Package | 16-PDIP |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2004 |
| Series | EPAD® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | General Purpose |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Max Power Dissipation | 600mW |
| Output Type | CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 180μA |
| Output Current | 50mA |
| Max Supply Current | 180μA |
| Quiescent Current | 180μA |
| Response Time | 1.1 μs |
| Common Mode Rejection Ratio | 75 dB |
ALD2321APCL Overview
The product is packaged in 16-DIP (0.300, 7.62mm) for ease of transportation.Output type of this comparator is CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL .We ship the part through Tube .Electronic comparator can be classified as a General Purpose chip.There are a total of 2 elements in it.The recommended mounting type is Through Hole .Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.The comparator has a pin count of 16 .There is a quiescent current of 180μA in this comparator.Mounting on PCBs or other boards is easy with the Through Hole .Normally, the nominal supply current should be 180μA .An excess of current supply over 180μA could result in malfunction of the comparator.You are allowed to input a maximum current of 20pA into the device.Comparator electronics is not recommended to operate the system at a temperature above 70°C .Temperatures below 0°C are not suitable for the device.Comparator electronics is specified that the comparator's maximum supply voltage is 10V .Comparator electronics is possible to supply this comparator wComparator electronicsh a voltage as low as 3V .To maintain the output quality, 2 channels work together.The part belongs to the series of comparator EPAD? .
ALD2321APCL Features
CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 180μA
ALD2321APCL Applications
There are a lot of Advanced Linear Devices Inc. ALD2321APCL linear comparators applications.
- Battery management and protection
- Industrial
- Infotainment and Clusters
- Motor drives
- Current and voltage sensing
- Wide Range VCO; MOS Clock Timers
- Zero-Crossing Detectors
- Pulse, Squarewave, and Time Delay Generators
- Window Comparators, Multivibrators
- Factory automation & control