ALD2303ASAL
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2010 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | General Purpose |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Max Power Dissipation | 600mW |
| Output Type | CMOS, NMOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40μA |
| Output Current | 60mA |
| Max Supply Current | 40μA |
| Quiescent Current | 40μA |
| Response Time | 6.5 μs |
| Voltage - Supply, Single/Dual (±) | 3V~10V ±1.5V~5V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 1mV |
| Input Bias Current | 1nA |
| Current - Quiescent (Max) | 40μA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 0.001μA @ 5V |
| Current - Output (Typ) | 60mA |
| RoHS Status | ROHS3 Compliant |
ALD2303ASAL Overview
A convenient packaging is provided in the form of 8-SOIC (0.154, 3.90mm Width) .A comparator with an output type of CMOS, NMOS, Open-Drain, TTL is being used.The part is shipped by Tube .It's a typical General Purpose comparator.Electronic comparator consists of 2 elements in total.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C in order to prevent malfunctions.8 pins are present on the comparator.The comparator presents a quiescent current of 40μA volts.There is a Surface Mount on the board for mounting to a PCB or other board.Normal operation of the device requires a nominal supply current of 40μA .A current supply greater than 40μA may result in the comparator malfunctioning.There is no recommendation for temperatures higher than 70°C .Comparator electronics cannot be used at a temperature below 0°C .The maximal supply voltage of the comparator is 12V .This comparator can be supplied with a voltage as low as 3V .The output quality is maintained by the cooperation of 2 channels.
ALD2303ASAL Features
CMOS, NMOS, Open-Drain, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 40μA
ALD2303ASAL Applications
There are a lot of Advanced Linear Devices Inc. ALD2303ASAL linear comparators applications.
- Zero-Crossing Detectors
- Window Comparators
- Automotive
- Handheld Instruments
- Self-diagnostics
- Multivibrators and High-Voltage Digital Logic Gates
- Pulse, Squarewave, and Time Delay Generators
- System control and monitoring
- Laptop Computers
- Mobile Phones and Tablets