ALD2302PAL
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Supplier Device Package | 8-PDIP |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | General Purpose |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Max Power Dissipation | 600mW |
| Output Type | CMOS, NMOS, Push-Pull, TTL |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Nominal Supply Current | 500μA |
| Output Current | 60mA |
| Max Supply Current | 500μA |
| Quiescent Current | 500μA |
| Response Time | 400 ns |
| Voltage - Supply, Single/Dual (±) | 4V~10V ±2V~5V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 4mV |
| Max Input Current | 1nA |
| Input Bias Current | 200pA |
| Current - Quiescent (Max) | 500μA |
| Voltage - Input Offset (Max) | 4mV @ 5V |
| Current - Input Bias (Max) | 0.001μA @ 5V |
| Current - Output (Typ) | 60mA |
| RoHS Status | ROHS3 Compliant |
ALD2302PAL Overview
A convenient packaging is provided in the form of 8-DIP (0.300, 7.62mm) .The comparator has a type CMOS, NMOS, Push-Pull, TTL output.This package has been designed with Tube .Electronic comparator can be classified as a General Purpose chip.This is a 2 element comparator.The recommended mounting type is Through Hole .If you want to avoid malfunction, you should set the operating temperature to 0°C~70°C .There are 8 pins on the comparator.A quiescent current of 500μA is displayed by this comparator.This component has a Through Hole mount for mounting to PCBs or other boards.Electronic comparator is recommended that the nominal supply current of the device be 500μA .A current supply greater than 500μA may result in the comparator malfunctioning.The maximal current your can input into the device is 1nA .Comparator electronics is not recommended to maintain a temperature above 70°C .Comparator electronics cannot be used at a temperature below 0°C .6V is the maximum supply voltage of the comparator.A voltage of 2V is the minimum supply voltage allowed by this comparator.To maintain output quality, 2 channels cooperate.
ALD2302PAL Features
CMOS, NMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 500μA
ALD2302PAL Applications
There are a lot of Advanced Linear Devices Inc. ALD2302PAL linear comparators applications.
- Automatic Test Equipment
- Limit Comparators
- Battery-Powered Electronics
- Ultra-Low Power Systems
- Appliances
- Notebooks and PDAs
- Simple Analog-to-Digital Converters (ADCs)
- Portable Battery Monitoring
- Window Comparators
- Handheld Instruments