ALD2301CSAL

ALD2301CSAL

Surface Mount Tube 60mA mA 650 ns μs Linear Comparators 4pA pA 1998 18μA μA 20mV mV Surface Mount


  • Manufacturer: Advanced Linear Devices Inc.
  • Origchip NO: 16-ALD2301CSAL
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 117
  • Description: Surface Mount Tube 60mA mA 650 ns μs Linear Comparators 4pA pA 1998 18μA μA 20mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 8 Weeks
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Supplier Device Package 8-SOIC
Operating Temperature 0°C~70°C
Packaging Tube
Published 1998
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Type General Purpose
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Max Power Dissipation 600mW
Output Type CMOS, NMOS, Open-Drain, TTL
Number of Elements 2
Number of Channels 2
Max Supply Voltage 12V
Min Supply Voltage 3V
Nominal Supply Current 18μA
Output Current 60mA
Max Supply Current 18μA
Quiescent Current 180μA
Response Time 650 ns
Voltage - Supply, Single/Dual (±) 3V~10V ±1.5V~5V
Output Current per Channel 60mA
Input Offset Voltage (Vos) 20mV
Input Bias Current 4pA
Current - Quiescent (Max) 180μA
Voltage - Input Offset (Max) 20mV @ 5V
Current - Input Bias (Max) 4pA @ 5V
Current - Output (Typ) 60mA
RoHS Status ROHS3 Compliant

ALD2301CSAL Overview


In order to make transportation easier, it is packaged in 8-SOIC (0.154, 3.90mm Width) .The comparator has a CMOS, NMOS, Open-Drain, TTL output.The chip is packaged with Tube .Electronic comparator is possible to classify the chip as General Purpose .There are a total of 2 elements in it.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.8 pins are present on the comparator.There is 180μA current flowing in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Normally, the nominal supply current should be 18μA when using the device.A supply current exceeding 18μA may result in the comparator malfunctioning.Temperature higher than 70°C is not recommended.Temperatures below 0°C are not suitable for the device.In the comparator, the maximum supply voltage is 12V .Comparator electronics is possible to operate this comparator wComparator electronicsh a minimum supply voltage of 3V .The output quality is maintained by the cooperation of 2 channels.

ALD2301CSAL Features


CMOS, NMOS, Open-Drain, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 180μA

ALD2301CSAL Applications


There are a lot of Advanced Linear Devices Inc. ALD2301CSAL linear comparators applications.

  • Battery-Powered Electronics
  • Automatic Test Equipment
  • Battery management and protection
  • Battery-Powered Electronics
  • Alarm and Monitoring Circuits
  • RC Timers
  • Window Comparators
  • General Purpose Low Voltage Applications
  • Pulse, Squarewave, and Time Delay Generators
  • Hand-Held Electronics

Write a review

Note: HTML is not translated!
    Bad           Good