ALD2301APAL
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Supplier Device Package | 8-PDIP |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1998 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | General Purpose |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Max Power Dissipation | 600mW |
| Output Type | CMOS, NMOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 18μA |
| Output Current | 60mA |
| Max Supply Current | 18μA |
| Quiescent Current | 180μA |
| Response Time | 650 ns |
| Voltage - Supply, Single/Dual (±) | 3V~10V ±1.5V~5V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 2mV |
| Max Input Current | 200pA |
| Input Bias Current | 200pA |
| Current - Quiescent (Max) | 180μA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 200pA @ 5V |
| Current - Output (Typ) | 60mA |
| RoHS Status | ROHS3 Compliant |
ALD2301APAL Overview
The product is packaged in 8-DIP (0.300, 7.62mm) to facilitate transportation.The comparator has a type CMOS, NMOS, Open-Drain, TTL output.The chip is packaged with Tube .A comparator of this type is typically of type General Purpose .Electronic comparator consists of 2 elements in total.Electronic comparator is recommended to mount using type Through Hole .A temperature setting of 0°C~70°C should be used for the operating temperature in order to prevent malfunctions.The comparator consists of 8 pins.There is a quiescent current of 180μA in this comparator.This component has a Through Hole mount for mounting to PCBs or other boards.Normal operation of the device requires a nominal supply current of 18μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 18μA .There is a maximum current that can be input into the device of 200pA .An increase in temperature over 70°C is not recommended.Comparator electronics cannot be operated at a temperature lower than 0°C .There is a maximum voltage supply on the comparator of 12V .The comparator is capable of operating at a minimum supply voltage of 3V .2 channels cooperate together to maintain the output quality.
ALD2301APAL Features
CMOS, NMOS, Open-Drain, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 180μA
ALD2301APAL Applications
There are a lot of Advanced Linear Devices Inc. ALD2301APAL linear comparators applications.
- Laptop Computers
- Portable and Battery-Powered Systems
- Power Supervision
- Zero-Crossing Detectors
- System control and monitoring
- Multivibrators and High-Voltage Digital Logic Gates
- Security Detection Systems
- Analog front end
- General Purpose Low Voltage Applications
- High-Speed Differential Line Receiver