ADSP-BF592BCPZ
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad, CSP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Type | Fixed Point |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.4V |
| Terminal Pitch | 0.5mm |
| Frequency | 400MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-BF592 |
| Pin Count | 64 |
| Interface | I2C, I2S, IrDA, PPI, SPI, SPORT, UART |
| Max Supply Voltage | 1.47V |
| Min Supply Voltage | 1.33V |
| Memory Size | 68kB |
| Number of I/O | 32 |
| RAM Size | 32kB |
| Memory Type | EEPROM, FLASH |
| Number of Bits | 16 |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 4 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Number of UART Channels | 1 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (64kB) |
| Voltage - Core | 1.29V |
| On Chip Data RAM | 64kB |
| Number of SPI Channels | 2 |
| Height | 950μm |
| Length | 9mm |
| Width | 9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF592BCPZ Overview
It is a type of electronic component available in package 64-VFQFN Exposed Pad, CSP.Packaging way Tray is provided.With its association with Fixed Point, it is suitable for a wide range of applications.The mounting of the device is done in the direction of Surface Mount.If it is operating at the temperature of -40°C~85°C TA, then it will be operating normally.As the name implies, the analog voltage range of 1.8V 2.5V 3.3V refers to the voltage that can be inserted or removed.The Blackfin? series incorporates this digital signal processor.In order to use it, it has 64 terminations.This device is powered by 1.4V's supply voltage.Pins are available on the 64 component.In its configuration, it contains 64 pins.It is possible to identify numerous related parts using the base part number ADSP-BF592.In order for the device to operate at the frequency of 400MHz, it has been designed specifically.Surface Mount is used as the mounting method.This device can be classified into the subcategory Microprocessors based on its specific characteristics.Devices like this can be powered with as little as 1.33V volts.This device can be powered by 1.47V voltages.Its memory is capable of storing 68kB data.1 UART channels are configured for asynchronous serial communication in which the data format and transmission speeds are configurable.External events are tracked and measured with 4 timers/counters.Processor core Blackfin adopts the Blackfin architecture.32 I/Os are present on the device.The memory type it uses is EEPROM, FLASH.There are 16 information stored in the device.2 SPI channels are used for short-distance communication in this embedded system.
ADSP-BF592BCPZ Features
Supplied in the 64-VFQFN Exposed Pad, CSP package
4 timers/counters
32 I/Os
ADSP-BF592BCPZ Applications
There are a lot of Analog Devices Inc. ADSP-BF592BCPZ DSP applications.
- Compression of videos
- Image signal processing
- Telephone conversations
- Voice recognition
- Digital camera
- Audio
- Machinery and equipment
- Seismology
- Radio detection and rangin systems
- 3D tomography and imaging processing