ADSP-BF531SBBCZ400
| Parameters | |
|---|---|
| Interface | SPI, SSP, UART |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 800mV |
| Memory Size | 52kB |
| RAM Size | 16kB |
| Memory Type | ROM |
| Number of Bits | 16 |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 4 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 3.30V |
| Number of PWM Channels | 3 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (1kB) |
| Voltage - Core | 1.20V |
| Number of SPI Channels | 1 |
| Height | 1.31mm |
| Length | 12.1mm |
| Width | 12.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 10 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 160-LFBGA, CSPBGA |
| Number of Pins | 160 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 160 |
| Termination | SMD/SMT |
| Type | Fixed Point |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Frequency | 400MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-BF531 |
| Pin Count | 160 |
ADSP-BF531SBBCZ400 Overview
It is a type of electronic component available in package 160-LFBGA, CSPBGA.It is provided with a packaging way of Tray.The fact that it belongs to the Fixed Point family means that it can be applied to a wide range of applications.Surface Mount is the direction in which it is mounted.Keeping the device at the temperature of -40°C~85°C TA will ensure that it runs as it should.The analog voltage range of 3.30V refers to the voltage that can be input or ouput.Blackfin? series digital signal processors contain this digital signal processor.For its use, it has 160 terminations.This device is powered by 1.2V's supply voltage.There are 160 component pins.160 pins can be found in its configuration.With its base part number of ADSP-BF531, many related parts can be identified.It is specifically designed to operate with the frequency of 400MHz.Surface Mount is the method of mounting it.This device can be classified into the subcategory Microprocessors based on its specific characteristics.The minimum voltage supplied to this device is as low as 800mV.This device can be powered by 3.6V voltages.Using this device, you can store 52kB data.To measure time and count events externally, 4 timers/counters are used.Using Blackfin architecture, this processor core operates.ROM is its memory type.Upon opening the device, there are 16 pieces of information stored.Short-range communication is achieved using 1 SPI channels in this embedded system.A 3 PWM channel controls analog circuits with digital signals.
ADSP-BF531SBBCZ400 Features
Supplied in the 160-LFBGA, CSPBGA package
4 timers/counters
ADSP-BF531SBBCZ400 Applications
There are a lot of Analog Devices Inc. ADSP-BF531SBBCZ400 DSP applications.
- Electronic information engineering
- Vehicle electronics
- Boats
- Digital image processing
- Geophysical processing
- Seismology
- Tomography technology
- Automatic analysis system of EEG or ECG
- Computers and laptop
- Dam design