ADSP-BF516KBCZ-3
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Copper, Silver, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 168-LFBGA, CSPBGA |
| Surface Mount | YES |
| Number of Pins | 168 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 168 |
| Type | Fixed Point |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.225V |
| Terminal Pitch | 0.8mm |
| Frequency | 400MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-BF516 |
| Pin Count | 168 |
| Operating Supply Voltage | 3.3V |
| Interface | Ethernet, I2C, PPI, RSI, SPI, SPORT, UART/USART |
| Max Supply Voltage | 7.1V |
| Min Supply Voltage | 1.164V |
| Memory Size | 116kB |
| Number of I/O | 40 |
| Speed | 300 MHz |
| RAM Size | 112kB |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Address Bus Width | 19 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Number of UART Channels | 2 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| Voltage - Core | 1.30V |
| Clock Rate | 300MHz |
| Height Seated (Max) | 1.7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF516KBCZ-3 Overview
It is a kind of electronic component available in the 168-LFBGA, CSPBGA package.Packaging method Tray is provided.With its association with Fixed Point, it is suitable for a wide range of applications.In order to mount it, it must be in the direction of Surface Mount.Operating at the temperature of 0°C~70°C TA ensures its normal operation.Voltages can be input or output within 1.8V 2.5V 3.3V's analog voltage range.It is a part of the Blackfin? series of digital signal processors.168 terminations are available for its use.It is supplied with voltage by 1.225V.Pins are present on the 168 component.The configuration of this board includes 168 pins.By using its base part number of ADSP-BF516, many related parts can be identified.To operate at 400MHz frequency, the device has a specific design.According to its specific characteristics, this device is classified in the subcategory Microprocessors.It is possible to supply as low a voltage as 1.164V to this device.7.1V is the maximum voltage that can be supplied to this device.This device is powered by a voltage of 3.3V.It can store 116kB data in its memory.The 2 UART channels support asynchronous serial communication in which data formats and transmission speeds are configurable.External events are tracked and measured with 9 timers/counters.Blackfin architecture is used for this processor core.40 I/Os are included with the device.
ADSP-BF516KBCZ-3 Features
Supplied in the 168-LFBGA, CSPBGA package
Operating supply voltage of 3.3V
9 timers/counters
40 I/Os
ADSP-BF516KBCZ-3 Applications
There are a lot of Analog Devices Inc. ADSP-BF516KBCZ-3 DSP applications.
- Consumer electronic gadgets
- Digital image processing, data compression
- Digital hardware
- Tomography technology
- Processing system
- Instrument modeling
- Automatic analysis system of EEG or ECG
- Tomography technology
- Monitoring equipment
- Computers and laptop