ADSP-BF512KSWZ-4
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 176 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| Type | Fixed Point |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 1.4V |
| Terminal Pitch | 0.5mm |
| Frequency | 400MHz |
| Base Part Number | ADSP-BF512 |
| Pin Count | 176 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, PPI, SPI, SPORT, UART/USART |
| Max Supply Voltage | 7.1V |
| Min Supply Voltage | 1.1V |
| Memory Size | 116kB |
| Number of I/O | 40 |
| RAM Size | 48kB |
| Memory Type | FLASH, OTP |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 8 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Number of PWM Channels | 3 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| Voltage - Core | 1.30V |
| Number of SPI Channels | 2 |
| Height | 1.45mm |
| Length | 24.1mm |
| Width | 24.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF512KSWZ-4 Overview
It is a kind of electronic component that comes in a package of 176-LQFP Exposed Pad.It has a packaging style of Tray.The Fixed Point family provides a wide range of applications.The mounting is carried out in the direction of Surface Mount.By operating the device at the temperature of 0°C~70°C TA, a normal operation is ensured.1.8V 2.5V 3.3V refers to the range of analog voltages that can be input or output.The Blackfin? series incorporates this digital signal processor.There are 176 terminations for its uses.A voltage of 1.4V is used as the supply voltage.Pins are located on the 176 component.In its configuration, there are 176 pins.Several related parts can be identified using its base part number, ADSP-BF512.To operate at 400MHz frequency, the device has a specific design.On the basis of its specific characteristics, this device can be classified as a Microprocessors device.Devices like this can be powered with as little as 1.1V volts.There is a maximum voltage supply of 7.1V to this device.A supply voltage of 3.3V is required for its operation.In its memory, this device can store 116kB data.Timer/counters with a 8-axis measure time and count external events.This processor core adopts the architecture of Blackfin.Device features 40 I/Os.As far as memory type is concerned, it uses FLASH, OTP.2 SPI channels are used for short-range communication in this embedded system.The 3 PWM channels control analog circuits digitally.
ADSP-BF512KSWZ-4 Features
Supplied in the 176-LQFP Exposed Pad package
Operating supply voltage of 3.3V
8 timers/counters
40 I/Os
ADSP-BF512KSWZ-4 Applications
There are a lot of Analog Devices Inc. ADSP-BF512KSWZ-4 DSP applications.
- Streaming videos
- House construction
- Airplanes
- Financial signals
- Real-time effects
- Electronic information engineering
- Remote sensing image processing technology
- Medical imaging
- Spectral density estimation
- Voice recognition