ADSP-BF512BSWZ-4
| Parameters | |
|---|---|
| Factory Lead Time | 16 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 176 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| Type | Fixed Point |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1.4V |
| Terminal Pitch | 0.5mm |
| Frequency | 400MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADSP-BF512 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, PPI, SPI, SPORT, UART/USART |
| Max Supply Voltage | 7.1V |
| Min Supply Voltage | 1.164V |
| Memory Size | 116kB |
| Number of I/O | 40 |
| RAM Size | 48kB |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Address Bus Width | 19 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Number of UART Channels | 2 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| Voltage - Core | 1.30V |
| Height Seated (Max) | 1.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF512BSWZ-4 Overview
The 176-LQFP Exposed Pad package contains these electronic components.It is provided with a packaging way of Tray.As a member of Fixed Point, it is ideally suitable for a wide range of applications.The machine is mounted in the way of Surface Mount in order to facilitate its operation.It is recommended that the device operate at a temperature of -40°C~85°C TA to ensure its normal operation.Voltages can be input or output within 1.8V 2.5V 3.3V's analog voltage range.Blackfin? series digital signal processors contain this digital signal processor.The terminations for its uses are 176.It works with a voltage of 1.4V as a supply voltage.Pins are present on the 176 component.In its configuration, it contains 176 pins.Many related parts can be identified by using the ADSP-BF512 part number as a base.Specifically, the device is designed to operate at a frequency of 400MHz.The device can be classified under the subcategory Microprocessors based on its specific characteristics.The minimum voltage supplied to this device is as low as 1.164V.7.1V is the maximum voltage that can be supplied to this device.It operates with the supply voltage of 3.3V.Its memory can be used to store 116kB data.The 2 UART channels are configured to support asynchronous serial transmissions of data in a format and speed that can be configured.9 timers/counters are used to measure time and count external events.Processor core Blackfin adopts the Blackfin architecture.Device features 40 I/Os.
ADSP-BF512BSWZ-4 Features
Supplied in the 176-LQFP Exposed Pad package
Operating supply voltage of 3.3V
9 timers/counters
40 I/Os
ADSP-BF512BSWZ-4 Applications
There are a lot of Analog Devices Inc. ADSP-BF512BSWZ-4 DSP applications.
- Seismology
- Scene analysis technology
- Audio signal
- Compression of videos
- Smart camera
- Seismology
- Audio
- Vibration signal processing
- Infinite impulse response filters
- Image signal processing