ADSP-21479BSWZ-2A
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Type | Floating Point |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Frequency | 266MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADSP-21479 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Interface | DAI, DPI, EBI/EMI, I2C, SPI, SPORT, UART/USART |
| Max Supply Voltage | 1.26V |
| Min Supply Voltage | 1.14V |
| Memory Size | 512kB |
| RAM Size | 640kB |
| Memory Type | ROM |
| Bit Size | 40 |
| Data Bus Width | 32b |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Integrated Cache | YES |
| Voltage - I/O | 3.30V |
| Number of UART Channels | 1 |
| Number of GPIO | 16 |
| Non-Volatile Memory | ROM (4Mbit) |
| Voltage - Core | 1.20V |
| On Chip Data RAM | 5Mbit |
| Number of SPI Channels | 2 |
| Height | 1.45mm |
| Length | 14.2mm |
| Width | 14.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 16 Weeks |
| Lifecycle Status | CONTACT ADI (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
ADSP-21479BSWZ-2A Overview
In the 100-LQFP Exposed Pad package, it is a type of electronic component.Packaging way Tray is provided.The Floating Point family provides a wide range of applications.The mounting of the device is done in the direction of Surface Mount.Keeping the device at the temperature of -40°C~85°C TA will ensure that it runs as it should.In analog circuits, the analog voltage range 3.30V represents the voltage range that is available for input or output.The SHARC? series includes this digital signal processor.For its use, it has 100 terminations.Using 1.2V as the supply voltage, it operates.Pins are available on the 100 component.In its configuration, it contains 100 pins.Many related parts can be identified by using the ADSP-21479 part number as a base.A specific design is present for the device in order for it to operate at the frequency of 266MHz.Based on its specific characteristics, this device can be classified into the subcategory of Digital Signal Processors.In this device, the minimum voltage is 1.14V.This device can be powered by 1.26V voltages.1.2V is the supply voltage for this device.This device is able to store 512kB data in its memory.Data format and transmission speed are configurable on 1 UART channels for asynchronous serial communication.SHARC architecture is used for this processor core.It uses ROM as its memory type.To communicate over short distances, this embedded system uses 2 SPI channels.An easy way to access the device's internal properties is provided by 16 GPIO.
ADSP-21479BSWZ-2A Features
Supplied in the 100-LQFP Exposed Pad package
Operating supply voltage of 1.2V
ADSP-21479BSWZ-2A Applications
There are a lot of Analog Devices Inc. ADSP-21479BSWZ-2A DSP applications.
- Signal processing for telecommunications
- Digital image processing
- Sonar
- Consumer electronic gadgets
- Audio compression
- Smart phones
- House construction
- Digital hardware
- Scene analysis technology
- Seismology