ADSP-21478KSWZ-2A
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | CONTACT ADI (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 100 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Type | Floating Point |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Frequency | 266MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADSP-21478 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Interface | DAI, DPI, EBI/EMI, I2C, SPI, SPORT, UART/USART |
| Max Supply Voltage | 1.26V |
| Min Supply Voltage | 1.14V |
| Memory Size | 512kB |
| RAM Size | 384kB |
| Memory Type | ROM |
| Bit Size | 40 |
| Data Bus Width | 32b |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Integrated Cache | YES |
| Voltage - I/O | 3.30V |
| Number of ADC Channels | 1 |
| Number of GPIO | 16 |
| Non-Volatile Memory | ROM (4Mbit) |
| Voltage - Core | 1.20V |
| On Chip Data RAM | 3Mbit |
| Number of SPI Channels | 2 |
| Height | 1.45mm |
| Length | 14.2mm |
| Width | 14.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-21478KSWZ-2A Overview
This is an electronic component with a 100-LQFP Exposed Pad package.The packaging way is Tray.As a member of Floating Point, it is ideally suitable for a wide range of applications.The device is attached in a way that faces Surface Mount.It is recommended that the device operate at a temperature of 0°C~70°C TA to ensure its normal operation.It refers to the analog voltage range of 3.30V that may be input or output.The SHARC? series contains this digital signal processor.The terminations for its uses are 100.It works with a voltage of 1.2V as a supply voltage.Pins are located on the 100 component.The configuration of the device includes 100 pins.The base part number ADSP-21478 can be used to identify many associated parts.266MHz is a frequency at which the device operates according to a specific design.As a result of its specific characteristics, this device can be classified under the Digital Signal Processors subcategory.This device operates at a voltage as low as 1.14V.Devices like this can be powered by voltages up to 1.26V.This device is powered by a voltage of 1.2V.Its memory can store 512kB data.SHARC architecture is used for this processor core.As far as memory type is concerned, it uses ROM.2 SPI channels are used for short-range communication in this embedded system.GPIOs provide an easier way to access the device's internal properties through 16 GPIOs.Analog values can be read simultaneously in an ADC based on the 1 channel number.
ADSP-21478KSWZ-2A Features
Supplied in the 100-LQFP Exposed Pad package
Operating supply voltage of 1.2V
ADSP-21478KSWZ-2A Applications
There are a lot of Analog Devices Inc. ADSP-21478KSWZ-2A DSP applications.
- Consumer electronic gadgets
- Financial signals
- MP3 audio player
- Voice recognition
- Control systems
- Audio signal
- Vehicle electronics
- Scene analysis technology
- Smart camera
- Speech processing and recognition