ADSP-21369KSWZ-5A
| Parameters | |
|---|---|
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (768kB) |
| Voltage - Core | 1.20V |
| Clock Rate | 366MHz |
| Height Seated (Max) | 1.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 208-LQFP Exposed Pad |
| Number of Pins | 208 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| Type | Floating Point |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 400MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-21369 |
| Pin Count | 208 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Interface | DAI, DPI |
| Max Supply Voltage | 3.47V |
| Min Supply Voltage | 1.235V |
| Memory Size | 768kB |
| Number of I/O | 16 |
| RAM Size | 256kB |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 24 |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | NO |
| Voltage - I/O | 3.30V |
| Number of UART Channels | 2 |
| Barrel Shifter | YES |
ADSP-21369KSWZ-5A Overview
The 208-LQFP Exposed Pad package contains these electronic components.Packaging is provided in the form of Tray.Due to its Floating Point membership, it is ideal for a wide range of applications.It is mounted in the direction of Surface Mount as shown in the image below.As long as it is operated at the temperature of 0°C~70°C TA, it will operate normally.The analog voltage range of 3.30V refers to the voltage that can be input or ouput.It is a part of the SHARC? series of digital signal processors.For its use, it has 208 terminations.It operates with the supply voltage of 1.3V.Pins are available for 208 components.In its configuration, 208 pins can be found.Many related parts can be identified by using the ADSP-21369 part number as a base.To operate at 400MHz frequency, the device has a specific design.Surface Mount is the method of mounting it.On the basis of its specific characteristics, this device can be classified as a Digital Signal Processors device.This device operates at a voltage as low as 1.235V.This device can handle a maximum voltage of 3.47V.A supply voltage of 3.3V is required for its operation.Its memory is capable of storing 768kB data.It is possible to configure the data format and transfer speed of 2 UART channels for synchronous serial communication.Time and external events are measured and counted with 3 timers/counters.Processor core SHARC adopts the SHARC architecture.The device has 16 I/Os.
ADSP-21369KSWZ-5A Features
Supplied in the 208-LQFP Exposed Pad package
Operating supply voltage of 3.3V
3 timers/counters
16 I/Os
ADSP-21369KSWZ-5A Applications
There are a lot of Analog Devices Inc. ADSP-21369KSWZ-5A DSP applications.
- Audio compression
- Processing system
- Other sensor array processing
- Machinery and equipment
- Streaming music
- TVs
- Airplanes
- Audio signal
- Digital communications
- Geophysical processing