ADP2108ACBZ-1.8-R7
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-WFBGA, WLCSP |
| Number of Pins | 5 |
| Weight | 42.013993mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN SILVER COPPER |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADP2108 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 95 % |
| Voltage - Input (Max) | 5.5V |
| Output Voltage | 1.8V |
| Output Type | Fixed |
| Max Output Current | 600mA |
| Voltage - Input (Min) | 2.3V |
| Input Voltage-Nom | 3.6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 30μA |
| Nominal Supply Current | 30μA |
| Output Configuration | Positive |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 3MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 1.8V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP2108ACBZ-1.8-R7 Overview
There is an optimized performance in this voltage regulator because it utilizes the Tape & Reel (TR) package. There are 5 terminations in this harley voltage regulator. A SWITCHING REGULATOR type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. Space-saving 5-WFBGA, WLCSP packages are available for this harley voltage regulator. There are 1 outputs on DC DC switching regulator. This DC DC switching regulator generates Fixed output on its output pins. Surface Mount-mount switching regulator. As long as its operating temperature is -40°C~125°C TA, dc to dc voltage regulator should perform well. Voltage regulator's switching frequency reaches 3MHz. The regulator is capable of operating with a dc to dc voltage regulator's minimum input voltage of 2.3V. There is a maximum input voltage of 5.5V for this voltage regulator 12v. As a result of the 260 peak reflow temperature, this regulator is essentially indestructible. Voltage regulator is designed to provide a nominal input voltage of 3.6V to meet the operation requirements. DC DC switching regulator is part of the Switching Regulator or Controllers subcategory and can be found in the Switching Regulator or Controllers category. The ADP2108 family of DC/DC regulators includes this DC/DC regulator. Voltage can be produced at 1.8V volts by voltage regulator. For switching regulator operation, 5 pins are used. As a general rule, this voltage regulator 12v should keep its output voltage at least at 1.8V. A 600mA A maximum output current is required to meet the switching regulator operation requirements. A supply current of 30μAmps is required to operate this DC-DC switching regulator.
ADP2108ACBZ-1.8-R7 Features
1 outputs
Peak reflow temperature (Cel) of 260
5 pins
ADP2108ACBZ-1.8-R7 Applications
There are a lot of Analog Devices Inc. ADP2108ACBZ-1.8-R7 Voltage Regulators applications.
- Grinders
- Laboratories
- Magnetohydrodynamic power
- Series voltage regulation circuits
- Servo drive system
- ATMs
- Alternators
- Emergency lighting monitoring equipment
- Thermal power
- Smart grid