ADP197ACPZN-02-R7
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UDFN Exposed Pad, CSP |
| Number of Pins | 6 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.4V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADP197 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3A |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 18μA |
| Nominal Supply Current | 28μA |
| Output Configuration | High Side |
| Power Dissipation | 24μW |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Fault Protection | Over Temperature |
| Rds On (Typ) | 27m Ω |
| Length | 2mm |
| Width | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP197ACPZN-02-R7 Overview
The package is in the form of a Tape & Reel (TR).It's included in the 6-UDFN Exposed Pad, CSP package.In this case, the LED driving board is mounted as Surface Mount.The switch type is General Purpose.It is recommended to set the temperature to -40°C~105°C TJ in order to ensure reliable operation.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.It has a maximum output voltage of N-Channel volts.Currently, the LED driving board is equipped with Load Discharge, Slew Rate Controlled features.As you can see, it comes from the ADP197 family.It contains 6 terminations.In order to operate, the 6 pins are used.It has 1 functions.The maximum output current is reduced to 3A to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 3.4V.In this case, it is mounted in the way of Surface Mount.There are 6 pins in total on this board.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.In total, there are 1 channels available.There is a maximum input voltage of 5.5V volts.As far as input voltage goes, it has a minimum of 1.8V volts.
ADP197ACPZN-02-R7 Features
Supplied from 3.4V
1 channels
ADP197ACPZN-02-R7 Applications
There are a lot of Analog Devices Inc. ADP197ACPZN-02-R7 Power Switches ICs applications.
- Wearable Devices
- Portable GPS Device
- Portable GPS
- Telecom and Network Systems
- Gaming
- Storage (HDDs, SSDs)
- Solid-State Drives
- Set-top-box
- Wireless/Networking Cards
- Solid State Drivers