ADM3490ARZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 22 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM3490 |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Operating Supply Current | 2.2mA |
| Nominal Supply Current | 2.2mA |
| Max Supply Current | 2.2mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 10Mbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 50mV |
| Number of Transceivers | 1 |
| ESD Protection | No |
| Simplex/Duplex | Full Duplex |
| Output Low Current-Max | 0.0025A |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADM3490ARZ-REEL7 Overview
An excellent driver IC for common LEDs thanks to its enhanced 8-SOIC (0.154, 3.90mm Width) package.In the Tape & Reel (TR) package, this receiver is mounted.As a Transceiver can transceiver, this part has enabled many applications to be served.Any Surface Mount-type PCB or development board can be used with this wide receiver.A differential driver like this uses 3V~3.6V of power.The field can have up to 1/1 eligible receivers/drivers at once when using this electronic part.IC receiver is designed for applications with a temperature of -40°C~85°C.This line driver ic can operate efficiently with a supply voltage range of 3.3V.This integrated circuit has 8 terminations designed for driving and receiving signals from data.The transceiver is packaged with 8 market standard pinouts so that it can be easily used.ADM3490 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.An enhanced power dissipation driver IC with 8 pins.In terms of resolution, this ic receiver was capable of providing a 1-bit resolution.Typically, the resolution of this receiver is specified to be 1 bits.This transceiver module is designed to operate from an input voltage supply of 3.3V.This rf transceiver module can be grouped into a subcategory named Line Driver or Receivers.ICs implement a total of 1 transceivers.Using the input voltage of 2.2mA, this integrating circuit is capable of driving LEDs with an output voltage of 12 volts.If the input current exceeds 2.2mA, this can transceiver could malfunction.
ADM3490ARZ-REEL7 Features
Tape & Reel (TR) package
8 pin count
8 pins
ADM3490ARZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADM3490ARZ-REEL7 Drivers/Receivers/Transceivers applications.
- Televisions
- Remote controls
- Data center
- Satellite ground stations
- Car radio
- Remote controls
- Car alarm systems
- interconnection between computers
- Structural bonding
- High-speed computer links