ADM238LJR
| Parameters | |
|---|---|
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Additional Feature | INTERNAL CHARGE PUMP |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADM238 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Operating Supply Current | 13mA |
| Nominal Supply Current | 13mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 4/4 |
| Receiver Number of Bits | 4 |
| Duplex | Full |
| Receiver Hysteresis | 650mV |
| Interface Standard | EIA-232-E; V.28 |
| Number of Drivers | 4 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
ADM238LJR Overview
Due to the enhanced 24-SOIC (0.295, 7.50mm Width) package, this driver IC is excellent for driving common LEDs.There is a Tube package for this receiver.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.You can place this wide receiver to any Surface Mount-type PCB or development board.This differential driver requires a 4.75V~5.25V power supply.This electronic part can have?up to 4/4 eligible receivers/drivers on the field at once.?Applications with operating temperatures of 0°C~70°C have been designed primarily for this ic receiver.Wide receiver can operate within the range of 5V supply voltages efficiently.This wide receiver has 24 terminations for driving and receiving data signals.As a standard package, this transceiver comes with a 24-pin layout that follows the market standard.With the part number ADM238 identifying the product type, temperature, package, etc., you can search with it to see more variants.An enhanced power dissipation driver IC with 24 pins.A dramatic reduction in package size is achieved through optical transceiver downsizing and high-density Surface Mount mounting technologies.This receiver is typically specified with a resolution of 4 bits. There is a 5V input voltage supply that can be used to operate this transceiver module.There is a subcategory named Line Driver or Receivers for this rf transceiver module.Driver ICs such as this one are designed to operate from 5V power sources.This IC implements 1 transceivers overall.4 drivers are embedded on the integrator circuit.This optical transceiver module also features the INTERNAL CHARGE PUMP function, improving the overall signal management stability and accuracy.Using the input voltage of 13mA, this integrating circuit is capable of driving LEDs with an output voltage of 12 volts.
ADM238LJR Features
Tube package
24 pin count
24 pins
5V power supply
ADM238LJR Applications
There are a lot of Analog Devices Inc. ADM238LJR Drivers/Receivers/Transceivers applications.
- Point-to-point networking
- Home theater wiring-free
- Wireless projection application for conferences
- Radio transmission
- Wireless modems
- Remote controls
- Satellite ground stations
- Clock radio
- Satellite communication
- Vehicle