ADG821BRM-REEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| -3db Bandwidth | 24MHz |
| On-State Resistance (Max) | 600mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 52 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 85pF 98pF |
| On-state Resistance Match-Nom | 0.16Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 45ns, 16ns |
| Charge Injection | 15pC |
| Channel-to-Channel Matching (ΔRon) | 160m Ω |
| Crosstalk | -82dB @ 1MHz |
| Switch-on Time-Max | 67ns |
| Switch-off Time-Max | 18ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | Non-RoHS Compliant |
ADG821BRM-REEL Overview
The electronic component is convenient to ship overseas because it is packed in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). High reliability is ensured by the advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Temperatures around -40°C~125°C TA are extended for operation. In total, 8 terminations have occurred. A electrical component with 1 channels is capable of high-quality output. In the case of a voltage supply of 3.6V volts, the electrical part can be powered up and run. There are 8 pins injected into the electronic part body. SPST - NO switching circuits are used in these analog switch ics. It consists of 2 circuits. The voltage required by this switch device is 1.8V~5.5V, draining from a single voltage supply.
ADG821BRM-REEL Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 24MHz
ADG821BRM-REEL Applications
There are a lot of Rochester Electronics, LLC ADG821BRM-REEL Analog Switches & Multiplexers ICs applications.
- Medical systems
- PBX interfaces
- Channel Banks
- Communication systems
- Power routing
- Audio and video signal routing
- Residential Gateways, Home Gateway/Router
- Multiplexers
- Video signal routing
- Video switching