ADG774BR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Additional Feature | ALSO OPERATE AT 5V SUPPLY |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | COMMERCIAL |
| Supply Voltage-Max (Vsup) | 3.3V |
| Number of Channels | 2 |
| Number of Circuits | 4 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| -3db Bandwidth | 240MHz |
| On-State Resistance (Max) | 2.2Ohm Typ |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 20pF |
| On-state Resistance Match-Nom | 0.15Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 15ns, 8ns |
| Charge Injection | 10pC |
| Channel-to-Channel Matching (ΔRon) | 150m Ω |
| Crosstalk | -75dB @ 10MHz |
| Switch-on Time-Max | 21ns |
| Switch-off Time-Max | 11ns |
| Voltage - Supply, Single (V+) | 3V~5V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| RoHS Status | Non-RoHS Compliant |
ADG774BR Overview
As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. The advanced packaging method Tube provides high reliability. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 2:1. Increasing operating temperature to around -40°C~125°C TA. Totally, there are 16 terminations. This electronic part offers high-quality output due to its 2 channels. Turning on and running the electrical part should be easy with a 3V voltage supply. A total of 16 pins are injected into the body of the electronic part. Multiplexers built on a SPDT switching circuit are built. A total of 4 circuits make up this switch device. This analogue multiplexer requires a voltage of 3V~5V when it drains from a single voltage supply. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. Don't forget the additional features of this electronic part, such as: ALSO OPERATE AT 5V SUPPLY.
ADG774BR Features
2 Channels
Switch Circuit: SPDT
-3db Bandwidth: 240MHz
Additional Features: ALSO OPERATE AT 5V SUPPLY
ADG774BR Applications
There are a lot of Rochester Electronics, LLC ADG774BR Analog Switches & Multiplexers ICs applications.
- SONET
- Cross Connects
- Relay replacements
- Battery Powered Instruments
- Fault Tolerant Systems
- PDAs
- Avionics test equipment
- Medical
- USB 1.1 signal switching circuits
- Cellular phones