ADG774ABRQ
| Parameters | |
|---|---|
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Throw Configuration | DPST |
| Number of Inputs | 8 |
| Supply Current-Max (Isup) | 0.001mA |
| -3db Bandwidth | 400MHz |
| On-State Resistance (Max) | 3.5Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 7.5pF |
| On-state Resistance Match-Nom | 0.15Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 12ns, 6ns |
| Charge Injection | 6pC |
| Channel-to-Channel Matching (ΔRon) | 150m Ω |
| Crosstalk | -70dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 3V~5V |
| Height Seated (Max) | 1.7526mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 3.5Ohm |
| Additional Feature | ALSO OPERATES WITH 5V NOMINAL SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG774 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.3V |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Number of Circuits | 4 |
ADG774ABRQ Overview
As the electronic part is packed in 16-SSOP (0.154, 3.90mm Width), international shipping is convenient. To ensure high reliability, a new packaging method Tube is used. Multiplexers like this are mounted in the Surface Mount position. There is 2:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. The total number of terminations is 16. The electronic part delivers high-quality output through its 2 channels. It is safe to turn on and run the electronic component with a 3V voltage supply. There are 16 pins injected into the electronic part body. The analog switch ics are built using SPDT switching circuits. It consists of 4 circuits. Look for analog switch ic variants by searching with ADG774. An switch multiplexer with 3.5Ohm internal resistance has a value of 3.5Ohm. You can find the functions of the 16 pins in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Using only a single voltage supply, this analog switch requires 3V~5V voltage. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. Among the inputs that can be operated are the 8 inputs. Check out the electrical component's additional features, such as the following: ALSO OPERATES WITH 5V NOMINAL SUPPLY.
ADG774ABRQ Features
2 Channels
Switch Circuit: SPDT
-3db Bandwidth: 400MHz
Additional Features: ALSO OPERATES WITH 5V NOMINAL SUPPLY
ADG774ABRQ Applications
There are a lot of Analog Devices Inc. ADG774ABRQ Analog Switches & Multiplexers ICs applications.
- SDH
- High-Voltage
- Cellular phones
- CSU
- SONET/SDH ADM
- Video signal routing
- Remote Powered Equipment
- Audio/video switches
- Sample-and-hold systems
- PBX interfaces