ADG758BCPZ
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 3Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 5μW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG758 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Nominal Supply Current | 1μA |
| Power Dissipation | 5μW |
| Throw Configuration | DPST |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±2.5V |
| Bandwidth | 55MHz |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Turn-Off Delay Time | 7 ns |
| On-State Resistance (Max) | 4.5Ohm |
| High Level Output Current | 30mA |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 13pF 85pF |
| On-state Resistance Match-Nom | 0.4Ohm |
| Switch Time (Ton, Toff) (Max) | 14ns, 8ns (Typ) |
| Charge Injection | 3pC |
| Crosstalk | -80dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 25ns |
| Drain to Source Resistance | 2.5Ohm |
| Signal Current-Max | 0.03A |
| Height | 830μm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG758BCPZ Overview
The electronic component is convenient to ship overseas because it is packed in a 20-WFQFN Exposed Pad, CSP. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Increasing operating temperature to around -40°C~85°C TA. In total, there have been 20 terminations. As a result of its 8 channels, this electronic component provides high-quality output. In the case of a voltage supply of 2.5V volts, the electrical part can be powered up and run. There is an electrical component included in the 20 series. Circuits number 1 make up this analogue multiplexer. Try searching with ADG758 if you're looking for variants. An switch multiplexer with 3Ohm internal resistance has a value of 3Ohm. The functions of 20 pins can be found in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. 1.8V is the lowest voltage the electrical component should receive. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. The electronic component can function from 5V. Among the inputs that can be operated are the 8 inputs. This switch operates within the bandwidth of 55MHz. A Drain to Source resistance of 2.5Ohm is shown for this electronic part.
ADG758BCPZ Features
8 Channels
Bandwidth: 55MHz
Drain-to-Source resistance: 2.5Ohm
ADG758BCPZ Applications
There are a lot of Analog Devices Inc. ADG758BCPZ Analog Switches & Multiplexers ICs applications.
- Modems
- Microwave transmission systems
- Isolation
- Industrial control systems
- T1/E1 Terminals
- Remote Powered Equipment
- Avionics and Military Systems
- Fiber In The Loop (FITL)
- Battery Powered Systems
- Precision data acquisition