ADG722BRM-REEL7
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | TIN LEAD |
| Additional Feature | ALSO OPEARTES AT 5 V SUPPLY |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 4Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 7pF 7pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 14ns, 6ns (Typ) |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 300m Ω |
| Crosstalk | -97dB @ 1MHz |
| Switch-off Time-Max | 11ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | Non-RoHS Compliant |
ADG722BRM-REEL7 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. There are 8 terminations totally. A 1 channel electronic part produces high-quality output. Turning on and running the electrical part should be easy with a 3V voltage supply. As part of its design, the 8 series is equipped with this electronic component. Circuits based on SPST - NC switching are used to construct these analog switch ics. The circuits in this analogue multiplexer number 2. An analogue multiplexer drains from a single voltage supply at 1.8V~5.5V. Additional features of the electronic component include: ALSO OPEARTES AT 5 V SUPPLY.
ADG722BRM-REEL7 Features
1 Channels
Switch Circuit: SPST - NC
-3db Bandwidth: 200MHz
Additional Features: ALSO OPEARTES AT 5 V SUPPLY
ADG722BRM-REEL7 Applications
There are a lot of Rochester Electronics, LLC ADG722BRM-REEL7 Analog Switches & Multiplexers ICs applications.
- High reliability control systems
- Audio and video routing
- Digital Cross-Connects
- Voice over IP/DSL – Integrated Access Devices, Smart
- Fiber In The Loop (FITL)
- Mechanical reed relay replacement
- Medical
- SONET
- Cellular phones
- Signal routing between systems