ADG620BRM
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | TIN LEAD |
| Additional Feature | ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±2.7V~5.5V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| -3db Bandwidth | 190MHz |
| On-State Resistance (Max) | 6.5Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 67 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 25pF |
| On-state Resistance Match-Nom | 0.7Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 65ns, 330ns |
| Charge Injection | 110pC |
| Channel-to-Channel Matching (ΔRon) | 700m Ω |
| Crosstalk | -67dB @ 1MHz |
| Switch-on Time-Max | 65ns |
| Switch-off Time-Max | 330ns |
| Length | 3mm |
| RoHS Status | Non-RoHS Compliant |
ADG620BRM Overview
The electronic component is convenient to ship overseas because it is packed in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. In Surface Mount, you'll find this switch device. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operation at a temperature around -40°C~85°C TA. Totally, there are 8 terminations. As a result of its 1 channels, this electronic component provides high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. 8 pins are injected to the electronic part body. The analog switch ics are built using SPDT switching circuits. This multiplexer is composed of 1 circuits. Additional features include: ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY.
ADG620BRM Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 190MHz
Additional Features: ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY
ADG620BRM Applications
There are a lot of Rochester Electronics, LLC ADG620BRM Analog Switches & Multiplexers ICs applications.
- Audio and video signal routing
- SONET/SDH ADM
- PDAs
- ISDN NT1/TA
- Frame Relay Equipment
- Avionics test equipment
- Data Acquisition Systems
- Precision test equipment
- Sample-and-hold systems
- Switching Systems