ADG528AKN
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 18 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Pin Count | 28 |
| Qualification Status | COMMERCIAL |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 10.8V~16.5V ±10.8V~16.5V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 450Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 22pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 22.5 Ω |
| Switch-on Time-Max | 300ns |
| Switch-off Time-Max | 300ns |
| Height Seated (Max) | 4.57mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
ADG528AKN Overview
Shipping overseas is convenient with the electronic component packed in 18-DIP (0.300, 7.62mm). In order to provide high reliability, an advanced packaging method Tube is used. A switch device like this is mounted in Through Hole. Multiplexers and demultiplexers have the same number of circuits 8:1. Operating temperature around -40°C~85°C TA extended. The total number of terminations is 18. High-quality output is provided by the electronic component's 8 channels. With a 15V voltage supply, the electrical component should be turned on and run. This electrical component is included in the 28 series of products. This multiplexer is composed of 1 circuits. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board.
ADG528AKN Features
8 Channels
ADG528AKN Applications
There are a lot of Rochester Electronics, LLC ADG528AKN Analog Switches & Multiplexers ICs applications.
- Residential Gateways, Home Gateway/Router
- Microprocessor controlled systems
- PDH Multiplexers
- Public switching systems
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- USB 1.1 signal switching circuits
- Communication systems
- Multi-Line E1 Interface Cards
- Cell phones
- Communication systems