ADG509AKR-REEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Additional Feature | ALSO OPERATES WITH 10.8 V TO 16.5 V SINGLE SUPPLY |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 10.8V~16.5V ±10.8V~16.5V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 450Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 11pF |
| On-state Resistance Match-Nom | 22.5Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 22.5 Ω |
| Switch-on Time-Max | 300ns |
| Switch-off Time-Max | 300ns |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
ADG509AKR-REEL Overview
Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. Extended operating temperature around -40°C~85°C TA. There are 16 terminations totally. By its 4 channels, the electronic component provides high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. A total of 16 pins are injected into the electrical part body. SP4T switching circuits are used in these analog switch ics. A total of 2 circuits make up this switch device. Integrated with an analog IC DIFFERENTIAL MULTIPLEXER. Additional features of the electronic component include: ALSO OPERATES WITH 10.8 V TO 16.5 V SINGLE SUPPLY.
ADG509AKR-REEL Features
4 Channels
Switch Circuit: SP4T
Additional Features: ALSO OPERATES WITH 10.8 V TO 16.5 V SINGLE SUPPLY
ADG509AKR-REEL Applications
There are a lot of Rochester Electronics, LLC ADG509AKR-REEL Analog Switches & Multiplexers ICs applications.
- Data switching
- Private Branch Exchange (PBX)
- RGB switches
- HDTV
- E1 Multiplexer
- Video signal routing
- Cable Modem
- Audio and video switching
- Voice over IP/DSL – Integrated Access Devices, Smart
- Frame Relay Equipment