ADG508FBRN
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 270Ohm |
| Additional Feature | ACTIVE OVERVOLTAGE PROTECTION |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 3.3mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG508 |
| Pin Count | 16 |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | -15V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 3mW |
| Max Supply Current | 1μA |
| Throw Configuration | DPST |
| Turn On Delay Time | 230 ns |
| Number of Inputs | 8 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 130 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 270Ohm Typ |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 93 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 22pF |
| On-state Resistance Match-Nom | 8.1Ohm |
| Switch Time (Ton, Toff) (Max) | 230ns, 130ns |
| Charge Injection | 15pC |
| Channel-to-Channel Matching (ΔRon) | 8.1 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 300ns |
| Signal Current-Max | 0.02A |
| Voltage - Supply, Dual (V±) | ±15V |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADG508FBRN Overview
Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. To ensure high reliability, a new packaging method Tube is used. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 8:1. Increasing operating temperature to around -40°C~85°C TA. Totally, there are 16 terminations. A electrical component with 8 channels is capable of high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. This electrical component is included in the 16 series of products. It consists of 1 circuits. Try searching for ADG508 variants of the analog switch ic. Analog switches have 270Ohm internal resistance. Datasheets for 16 pin functions are available upon request. There is a standard Multiplexer or Switches analogue multiplexer here. Users should never supply a voltage higher than 15V to a switch device. It is recommended that the electrical component receives a voltage of -15V. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. Despite this switch's dual supply capability, its voltage should not exceed 22V. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. Among the inputs that can be operated are the 8 inputs. Additional features include: ACTIVE OVERVOLTAGE PROTECTION.
ADG508FBRN Features
8 Channels
Additional Features: ACTIVE OVERVOLTAGE PROTECTION
ADG508FBRN Applications
There are a lot of Analog Devices Inc. ADG508FBRN Analog Switches & Multiplexers ICs applications.
- Routers
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Multiplexers
- Public switching systems
- Microprocessor Controlled Analog Systems
- Signal routing between systems
- Remote Powered Equipment
- Medical
- USB 1.1 signal switching circuits
- Battery Powered Instruments