ADG428BP
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 220 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | ADG428 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 800mW |
| Throw Configuration | DPST |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 12V ±15V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 100Ohm |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 40pF |
| On-state Resistance Match-Nom | 10Ohm |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Crosstalk | -85dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 225ns |
| Switch-off Time-Max | 300ns |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
ADG428BP Overview
The electronic component is convenient to ship overseas because it is packed in a 20-LCC (J-Lead). A high level of reliability can be achieved through the use of an advanced packaging method Tube. The multiplexer is located in Surface Mount. 8:1 is the ratio between multiplexers and demultiplexers. Operating temperature extended to -40°C~85°C TA. A total of 20 terminations have been recorded. By its 8 channels, the electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. As part of the design of the 20 series, this electronic part has been incorporated into the system. There are 1 circuits in this switch device. Try searching for the analog switch ic with ADG428 if you are looking for variants. Internally, this switch multiplexer has a resistance of 100Ohm. Datasheets for functions of 20 pins are available. Theswitch device is a typical Multiplexer or Switches. There is no problem with using dual supply voltage, but it should not exceed 22V. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. Operating 8 inputs is required.
ADG428BP Features
8 Channels
ADG428BP Applications
There are a lot of Analog Devices Inc. ADG428BP Analog Switches & Multiplexers ICs applications.
- PBX interfaces
- Audio signal routing
- High speed data transmission line cards
- Video signal routing
- MP3 players
- Medical Instrumentation
- Mechanical reed relay replacement
- Cable Modem
- Sample hold systems
- DSLAMs