ADG417BRZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 35Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 35μW |
| Base Part Number | ADG417 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 9V |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 100pA |
| Power Dissipation | 35μW |
| Max Supply Current | 1μA |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Turn On Delay Time | 160 ns |
| Number of Inputs | 1 |
| Voltage - Supply, Single/Dual (±) | 12V ±15V |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 100 ns |
| Max Dual Supply Voltage | 15V |
| On-State Resistance (Max) | 35Ohm |
| Min Dual Supply Voltage | 5V |
| High Level Output Current | 30mA |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 6pF 6pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 160ns, 100ns |
| Charge Injection | 7pC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG417BRZ-REEL Overview
The electrical component comes in 8-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Operation at a temperature around -40°C~85°C TA. Due to its 1 channels, the electrical component produces high-quality output. Unlike digital switches, these are based on SPST - NC switching circuits. It consists of 1 circuits. Try searching for ADG417 variants of the analog switch ic. A 35Ohm internal resistance characterizes this multiplexer. You can find the functions of the 8 pins in the datasheets. It is generally not recommended to supply a voltage higher than 12V to the switch device in normal circumstances. The analog switch ic is of the Dual, Single supply type and is cost-effective. 5V is the lowest voltage the electrical component should receive. This multiplexer would work with 100pA current. A digital multiplexer may suffer damage if voltage is applied above 1μA. For this switch, a dual supply voltage is feasible, but it must not exceed 15VIt is recommended that you attach at least 5V to your dual power supply. A voltage of 9V can be used to operate the electronic component. Among the inputs that can be operated are the 1 inputs. It is not recommended to operate the switches in an environment with a temperature higher than 85°C. 1 outputs are included in the analogue multiplexer. There is a 8-SOIC package offered by suppliers. It can conduct in a 1-bit manner.
ADG417BRZ-REEL Features
1 Channels
Switch Circuit: SPST - NC
100pA Supply Current
1-Bit
ADG417BRZ-REEL Applications
There are a lot of Analog Devices Inc. ADG417BRZ-REEL Analog Switches & Multiplexers ICs applications.
- SDH/SONET multiplexers
- High speed data transmission line cards
- Precision instrumentation
- Digital cross connects (DSX-1)
- Ultrasound
- PDH Multiplexers
- Cell phones
- Relay Replacement
- Sample hold systems
- Microwave transmission systems