ADG3249BRJ-R2
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 8 |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 8Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG3249 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Max Supply Current | 200μA |
| Number of Bits | 2 |
| Throw Configuration | DPST |
| Propagation Delay | 225 ps |
| Quiescent Current | 200μA |
| Turn On Delay Time | 8.2 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| -3db Bandwidth | 610MHz |
| High Level Output Current | -25mA |
| Low Level Output Current | 25mA |
| On-state Resistance Match-Nom | 0.1Ohm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
ADG3249BRJ-R2 Overview
Packed in SOT-23-8, the electronic component is convenient for shipping overseas. High reliability is achieved by using advanced packaging method Cut Tape (CT). A switch device like this is mounted in Surface Mount. In total, 8 terminations have occurred. Due to its 2 channels, the electrical component produces high-quality output. When a voltage supply of 3V is used, the electronic component should be turned on and run. It is part of the design of the 8 series that this electronic component is included. Try searching with ADG3249 to find analog multiplexer variants. Analog switches have 8Ohm internal resistance. To find out what the functions of 8 pins are, please refer to their datasheets. It is generally not recommended to supply a voltage higher than 3.6V to the switch device in normal circumstances. Digital switch that provides Single power at a cost-effective price. It is recommended that the electrical component receives a voltage of 2.3V. If you put voltage higher than 200μA on the digital multiplexer, damage may occur. Temperatures above 85°C should not be used to operate the switches. It conducts in a 2-bit manner.
ADG3249BRJ-R2 Features
2 Channels
-3db Bandwidth: 610MHz
2-Bit
ADG3249BRJ-R2 Applications
There are a lot of Analog Devices Inc. ADG3249BRJ-R2 Analog Switches & Multiplexers ICs applications.
- Public switching systems
- Mechanical reed relay replacement
- FTTH
- Cable PC
- Access Concentrators
- RGB switches
- Channel Banks
- Optical Applications
- Low-Voltage
- Existing multiplexer applications (both fault-protected and nonfault-protected)