ADG1419BRMZ
| Parameters | |
|---|---|
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG1419 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 12V |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Interface | Parallel |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 5V |
| Test Frequency | 1MHz |
| Power Dissipation | 2mW |
| Max Supply Current | 120μA |
| Turn On Delay Time | 85 ns |
| Number of Inputs | 1 |
| Voltage - Supply, Single/Dual (±) | 5V~16.5V ±4.5V~16.5V |
| Bandwidth | 135MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 115 ns |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 2.4Ohm |
| Min Dual Supply Voltage | 4.5V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 64 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 19pF 44pF |
| On-state Resistance Match-Nom | 0.05Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 110ns, 140ns |
| Insertion Loss (dB) | 0.16 dB |
| Charge Injection | -16pC |
| Channel-to-Channel Matching (ΔRon) | 50m Ω |
| Crosstalk | -64dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Height | 1.1mm |
| Length | 3.2mm |
| Width | 3.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 20 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 2.4Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 2mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
ADG1419BRMZ Overview
This electronic part is conveniently packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), making it easy to ship abroad. Advanced packaging method Tube is used to provide high reliability. The multiplexer is located in Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. Operation at a temperature around -40°C~125°C TA. The total number of terminations is 8. High-quality output is provided by the electronic component's 1 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. There is an electrical component included in the 8 series. A SPDT switching circuit is used for these analog switches. Using the ADG1419 search parameter, you can discover variants of the switch. Analog switches have 2.4Ohm internal resistance. You can find the functions of the 8 pins in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 16.5V. There should be 5V voltage fed to the electrical part below 5V. The analogue multiplexer may be damaged if voltage is greater than 120μA. Despite this switch's dual supply capability, its voltage should not exceed 16.5V. It is recommended that you attach at least 4.5V to your dual power supply. There is a voltage range of 12V operating voltages for the electrical part. It is possible to operate 1 inputs. The data can be transferred over a wide range of bandwidths, called 135MHz bandwidths. Multiplexer ics with 2 outputs are available.
ADG1419BRMZ Features
1 Channels
Switch Circuit: SPDT
Bandwidth: 135MHz
ADG1419BRMZ Applications
There are a lot of Analog Devices Inc. ADG1419BRMZ Analog Switches & Multiplexers ICs applications.
- Cable PC
- E1 Network Equipment
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Mechanical reed relay replacement
- Imaging
- Switching Systems
- ATM
- DVD-R
- Frame Relay Equipment
- Cable Telephony – NIU, Set-Top Box, Home Side Box