ADG1406BRUZ
| Parameters | |
|---|---|
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG1406 |
| Pin Count | 28 |
| Operating Supply Voltage | 12V |
| Number of Channels | 16 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 5V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Nominal Supply Current | 280μA |
| Power Dissipation | 280μW |
| Number of Inputs | 16 |
| Voltage - Supply, Single/Dual (±) | 5V~16.5V ±4.5V~16.5V |
| Bandwidth | 60MHz |
| Supply Current-Max (Isup) | 0.4mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 98 ns |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 11.5Ohm |
| Min Dual Supply Voltage | 4.5V |
| Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 73 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 90pf |
| On-state Resistance Match-Nom | 1.3Ohm |
| Switch Time (Ton, Toff) (Max) | 110ns, 120ns |
| Charge Injection | 10pC |
| Channel-to-Channel Matching (ΔRon) | 550m Ω |
| Crosstalk | -70dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 445ns |
| Switch-off Time-Max | 370ns |
| Signal Current-Max | 0.03A |
| Height | 1.05mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 11.5Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 280μW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
ADG1406BRUZ Overview
The electronic component is convenient to ship overseas because it is packed in a 28-TSSOP (0.173, 4.40mm Width). High reliability is ensured by the advanced packaging method Tube. Multiplexers like this are mounted in the Surface Mount position. 16:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature around -40°C~125°C TA extended. A total of 28 terminations have been recorded. By its 16 channels, the electronic component provides high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. The electrical component body receives 28 pins. It consists of 1 circuits. Try searching for ADG1406 variants of the analog switch ic. The internal resistance of this digital multiplexer is 11.5Ohm. To find out what the 28 pins do, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Users should never supply a voltage higher than 16.5V to a switch device. 5V should be the lowest voltage fed to the electronic component. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 16.5V. For dual power supplies, a voltage of at least 4.5V should be attached. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board. 12V operating voltages are supported by the electronic component. The electrical component supports 16 inputs. 60MHz-bandwidths can be used to transfer data between multiplexers.
ADG1406BRUZ Features
16 Channels
Bandwidth: 60MHz
ADG1406BRUZ Applications
There are a lot of Analog Devices Inc. ADG1406BRUZ Analog Switches & Multiplexers ICs applications.
- Industrial
- Audio/video switches
- Ultrasound
- Audio and video signal routing
- Intelligent PBX
- Microprocessor Controlled Analog Systems
- New designs requiring multiplexer functions
- Microprocessor controlled systems
- Fiber to the Home
- SONET