ADG1204YCPZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 12 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Resistance | 190Ohm |
| Max Power Dissipation | 1.3mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG1204 |
| Pin Count | 12 |
| Operating Supply Voltage | 12V |
| Number of Channels | 4 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Operating Supply Current | 170μA |
| Power Dissipation | 1.3mW |
| Throw Configuration | 4PST |
| Logic Function | Multiplexer |
| Supply Type | Dual, Single |
| Bandwidth | 800MHz |
| Supply Current-Max (Isup) | 0.23mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 90 ns |
| On-State Resistance (Max) | 190Ohm |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 85 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 1.5pF 4.2pF |
| On-state Resistance Match-Nom | 3.5Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 85ns, 110ns |
| Charge Injection | -0.7pC |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Crosstalk | -80dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 85ns |
| Voltage - Supply, Dual (V±) | ±15V |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG1204YCPZ-REEL7 Overview
As the electronic part is packed in 12-WFQFN Exposed Pad, CSP, international shipping is convenient. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 4:1. Increasing operating temperature to around -40°C~125°C TA. Totally, there are 12 terminations. Due to its 4 channels, the electrical component produces high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. 12 pins are injected to the electronic part body. A SP4T switching circuit is used for these analog switches. It consists of 1 circuits. Try searching with ADG1204 to find analog multiplexer variants. Internally, this switch multiplexer has a resistance of 190Ohm. Datasheets for functions of 12 pins are available. Digital switch that provides Dual, Single power at a cost-effective price. It would be sufficient to run this analogue multiplexer with 170μA current. Operating voltages range from 12V. There are various bandwidths available for data transfer.
ADG1204YCPZ-REEL7 Features
4 Channels
Switch Circuit: SP4T
170μA Supply Current
Bandwidth: 800MHz
ADG1204YCPZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG1204YCPZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Avionics test equipment
- Audio and video switching
- Communication systems
- Modems
- Digital Cross-Connects
- High reliability control systems
- Cross Connects
- PCMCIA cards
- Fiber In The Loop (FITL)
- Wireless Local Loop