ADF4193BCPZ-RL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad, CSP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | Clock/Frequency Synthesizer (RF) |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.3V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADF4193 |
| Output | Clock |
| Pin Count | 32 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3V |
| Power Supplies | 3V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Circuits | 1 |
| Operating Supply Current | 68mA |
| Nominal Supply Current | 30mA |
| Frequency (Max) | 3.5GHz |
| Supply Current-Max (Isup) | 27mA |
| Input | CMOS, TTL |
| Ratio - Input:Output | 2:1 |
| PLL | Yes |
| Differential - Input:Output | Yes/No |
| Divider/Multiplier | Yes/Yes |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
ADF4193BCPZ-RL Overview
The Tape & Reel (TR) method is used for packaging clock ICs. Embedded in the 32-WFQFN Exposed Pad, CSP package is this Clock PLL. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. There are a total of 32 terminations in this file. This clock generator ic should receive a voltage of 3V. In this clock generator, CMOS, TTL is used as the input to the clock. There are 1 circuits implemented in order to achieve full performance from this electronic part. Providing a maximum frequency of 3.5GHz, this clock-based RF synthesizer is suitable for a variety of applications. PLL clock is mounted in the way of Surface Mount. It is safe to use this frequency synthesizer with a supply voltage above 2.7V. Clock generators should operate with the voltage supply of 2.7V~3.3V. Using the test statistics, we estimate that the ambient temperature should be -40°C~85°C. Clock is designed for clock generator's output. It has been classified as a Clock/Frequency Synthesizer (RF) electronic part, which means that it is a semiconductor. An IC that generates clocks specifically for microprocessors, this clock PLL is 32-bits in si32e. This part number ADF4193 is related to the following electrical components. PLL is designed with 32 pins. This time clock generator can handle a voltage of 3V as its supply voltage. Fundamentally, this is a kind of PLL or Frequency Synthesis Circuits clock PLL. For the RF synthesizer to function properly, a supply current of 68mA must be provided. There should be a maximum supply current of 27mA for this time clock generator.
ADF4193BCPZ-RL Features
Available in the 32-WFQFN Exposed Pad, CSP
Supply voltage of 3V
Operating supply voltage of 3V
ADF4193BCPZ-RL Applications
There are a lot of Analog Devices Inc. ADF4193BCPZ-RL Clock Generators applications.
- Frequency synthesis
- Vector network analyzers (VNA)
- GPS systems
- Signal analyzer
- Small signal recovery
- Radiotelephones
- Phase modulation cellular systems
- Sampling clocks for ADC and DAC
- Symbol synchronization
- High-speed optical transport network (OTN)