ADF4157BCPZ
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad, CSP |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | Fractional N Synthesizer (RF) |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Voltage - Supply | 2.7V~3.3V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADF4157 |
| Output | Clock |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3V |
| Power Supplies | 3.3/5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Operating Supply Current | 23mA |
| Nominal Supply Current | 23mA |
| Max Supply Current | 29mA |
| Frequency (Max) | 6GHz |
| Input | CMOS, TTL |
| Ratio - Input:Output | 2:1 |
| PLL | Yes |
| Differential - Input:Output | Yes/No |
| Divider/Multiplier | Yes/Yes |
| Height | 750μm |
| Length | 4.1mm |
| Width | 4.1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADF4157BCPZ Overview
A clock integrated circuit is packaged in a Tray-shaped package because it is for use as a clock. The 20-WFQFN Exposed Pad, CSP package includes this clock generator. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. As a result of this, we can find 20 terminations. Basically, a voltage of 3V should be applied to this electronic frequency generator. The input of this clock generator is designed to be CMOS, TTL. It provides a maximum frequency of 6GHz. Because of the Surface Mount, clock PLL can be easily mounted on the panel. Keeping the supply voltage for this frequency synthesizer above 2.7V is recommended for safety reasons. As long as there are 2.7V~3.3V supply voltages provided, clock generator ic should work. Using the test statistics, we estimate that the ambient temperature should be -40°C~85°C. It's compatible with Clock logic levels. An electrical part such as this one can be classified as a Fractional N Synthesizer (RF) component. Microprocessors are specifically designed to use this clock-generating IC, which has a 20-bit output. According to the base part number ADF4157, its related parts can be found. It is possible to connect to the frequency generators via 20 pins. Electronic frequency generator can handle voltages up to 3V. The clock PLL is generally classified as a PLL or Frequency Synthesis Circuits device. 1 signal outputs are provided for enhancing output frequency as much as possible. A supply current of 23mA is required to fully operate clock PLL. The maximal current supplied for this frequency synthesizer operation reaches 29mA.
ADF4157BCPZ Features
Available in the 20-WFQFN Exposed Pad, CSP
Supply voltage of 3V
Operating supply voltage of 3V
ADF4157BCPZ Applications
There are a lot of Analog Devices Inc. ADF4157BCPZ Clock Generators applications.
- Various decoding circuits
- 10 Gigabit Ethernet
- Wireless infrastructure
- Microwave point-to-point systems
- Smartphones
- Clock recovery
- Laptops
- Frequency shifting decodes
- Small signal recovery
- Satellite receivers