ADF4150HVBCPZ
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad, CSP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 3GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADF4150 |
| Output | Clock |
| Pin Count | 32 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | Serial |
| Number of Circuits | 1 |
| Analog IC - Other Type | PLL FREQUENCY SYNTHESIZER |
| Operating Supply Current | 50mA |
| Nominal Supply Current | 50mA |
| Input | CMOS, TTL |
| Ratio - Input:Output | 1:2 |
| PLL | Yes |
| Differential - Input:Output | No/Yes |
| Divider/Multiplier | Yes/No |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADF4150HVBCPZ Overview
A clock integrated circuit is packaged in a Tray-shaped package because it is for use as a clock. In the 32-VFQFN Exposed Pad, CSP package, there is an embedded clock generator. This clock generator ic can sustain 260 degrees of temperature during reflowing. As a result of this, we can find 32 terminations. Clock generator ics require a voltage of 3.3V. It is designed that the Clock PLL's input should be CMOS, TTL. 1 circuits are implemented to access the electronic component's full performance. The Surface Mount allows this electrical component to be easily installed on the panel. It would take a maximum supply voltage of 3.6V to operate this time clock generator. A maximum voltage of 3V should be used for this frequency generator for safety reasons. As far as the supply voltage is concerned, clock PLL can be used with 3V~3.6V. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~85°C. The RF synthesizer is compatible with Clock logic levels. Microprocessor-specific clock PLL with 32 bits. It is possible to find its related electronic parts by searching for the base part number ADF4150. There are 32 pins on the frequency generator that are available for use. The maximum supply voltage that analog clock generator can handle is 3.3V. The clock PLL is generally classified as a PLL or Frequency Synthesis Circuits device. 4 signal outputs are provided for enhancing output frequency as much as possible. At 3GHz, frequency synthesizer achieves high efficiency. A supply current of 50mA needs to be provided to fully play RF synthesizer's function. Analog ICs are classified as PLL FREQUENCY SYNTHESIZER-devices and this RF synthesizer is one.
ADF4150HVBCPZ Features
Available in the 32-VFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
ADF4150HVBCPZ Applications
There are a lot of Analog Devices Inc. ADF4150HVBCPZ Clock Generators applications.
- Clock synchronization
- Mobile telephones
- Camera systems
- Electronic countermeasures
- Myriad digital applications
- Wi-Fi routers
- Sampling clocks for ADC and DAC
- Signal generator
- Test and instrumentation equipment
- Antenna automatic tracking