ADF4116BRUZ
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Clock/Frequency Synthesizer (RF) |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Frequency | 550MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADF4116 |
| Output | Clock |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 5V |
| Number of Circuits | 1 |
| Operating Supply Current | 4.5mA |
| Nominal Supply Current | 4.5mA |
| Max Supply Current | 5.5mA |
| Input | CMOS, TTL |
| Ratio - Input:Output | 2:1 |
| PLL | Yes |
| Differential - Input:Output | Yes/No |
| Height | 1.05mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADF4116BRUZ Overview
In order to package it as a clock IC, the Tube package is used. As part of the 16-TSSOP (0.173, 4.40mm Width) package, this clock generator is embedded. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. 16 terminations can be found in frequency generators. The supply voltage of 3V allows for high efficiency. As the Clock PLL's input, CMOS, TTL is designed to be used in order to generate the clock signal. A total of 1 circuits are implemented to access the full performance of the electrical part. Because of the Surface Mount, clock PLL can be easily mounted on the panel. There are 2.7V~5.5V different supply voltages that can be provided for this RF synthesizer. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~85°C. Clock is designed for clock generator's output. A Clock/Frequency Synthesizer (RF) is a classification for the electronic part in question. It is a 16-bit clock PLL designed specifically for microprocessors. The related electronic parts of part number ADF4116 are listed below. There are 16 pins on the frequency generator that are available for use. The supply voltage should be maintained at 5V for high efficiency. A PLL or Frequency Synthesis Circuits clock generator is essentially what this device is. Clock PLL has 2 signal outputs to maximi2e output frequency. At a frequency of 550MHz, frequency generator is capable of achieving high efficiency. This time clock generator requires a supply current of 4.5mA in order to operate properly. This clock generator operation can supply up to 5.5mA of current.
ADF4116BRUZ Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 5V
ADF4116BRUZ Applications
There are a lot of Analog Devices Inc. ADF4116BRUZ Clock Generators applications.
- HDD recorders
- Coherent carrier tracking
- Carrier synchronization in wired communication
- Reference signals to RF systems
- FPGA and processor clocks
- Line cards used in telephone exchange
- Jitter reduction
- Symbol synchronization
- Clock generation systems
- Clock synchronization