ADF4110BRU-REEL7
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Clock/Frequency Synthesizer (RF) |
| Additional Feature | 6-BIT SWALLOW COUNTER |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADF4110 |
| Output | Clock |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Operating Supply Current | 4.5mA |
| Nominal Supply Current | 4.5mA |
| Frequency (Max) | 550MHz |
| Input | CMOS, TTL |
| Ratio - Input:Output | 2:1 |
| PLL | Yes |
| Differential - Input:Output | Yes/No |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADF4110BRU-REEL7 Overview
As a clock IC, it uses the Tape & Reel (TR) package. The 16-TSSOP (0.173, 4.40mm Width) package includes this clock generator. The frequency generator is capable of withstanding a maximum temperature of 240 during reflowing. It contains a total of 16 terminations within RF synthesizer. This clock generator ic should receive a voltage of 3V. As the Clock PLL's input, CMOS, TTL is designed to be used in order to generate the clock signal. This clock-based frequency generator provides a frequency up to 550MHz Max. This component can be conveniently installed on the panel thanks to the Surface Mount. For safety reasons, this frequency synthesizer should have a voltage supply above 2.7V. This clock PLL works with a supply voltage of 2.7V~5.5V. The temperature should be set at -40°C~85°C to ensure reliable performance. A frequency synthesizer which is compatible with the Clock logic levels is presented here. As far as this electronic part is concerned, it can be classified as a Clock/Frequency Synthesizer (RF) component. It is a 16-bit IC that is designed for microprocessors specifically. It is possible to find its related electronic parts by searching for the base part number ADF4110. There is a 16 pin that is available on the digital clock generator. Electronic frequency generator can handle voltages up to 5V. PLL or Frequency Synthesis Circuits-type frequency generators are usually classified as this type. There is a 6-BIT SWALLOW COUNTER feature on this frequency generator in order to produce a better clock signal. The output frequency can be magnified as high as possible with the assistance of 1 signal outputs. The supply current of 4.5mA needs to be provided to fully play clock generator's function.
ADF4110BRU-REEL7 Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 5V
ADF4110BRU-REEL7 Applications
There are a lot of Analog Devices Inc. ADF4110BRU-REEL7 Clock Generators applications.
- Wireless handsets
- Pagers
- Microwave backhaul IF
- FMCW Radar
- Automatic test equipment
- FSK demodulators
- Line cards used in telephone exchange
- Threshold extension
- Cable television converter boxes
- Radio receivers