ADF4107BCPZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad, CSP |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Clock/Frequency Synthesizer (RF) |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Voltage - Supply | 2.7V~3.3V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADF4107 |
| Output | Clock |
| Pin Count | 20 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3V |
| Power Supplies | 3/5V |
| Number of Circuits | 1 |
| Operating Supply Current | 17mA |
| Nominal Supply Current | 15mA |
| Frequency (Max) | 7GHz |
| Input | CMOS, TTL |
| Ratio - Input:Output | 2:1 |
| PLL | Yes |
| Differential - Input:Output | Yes/No |
| Divider/Multiplier | No/No |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADF4107BCPZ-REEL Overview
As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. The 20-WFQFN Exposed Pad, CSP package contains this clock generator. This clock generator ic can sustain 260 degrees of temperature during reflowing. As a result of this, we can find 20 terminations. Basically, this time clock generator needs a voltage of 3V. CMOS, TTL is designed as this clock generator's input. For full access to the electronic component's capabilities, 1 circuits are implemented. A clock-based RF synthesizer that provides a max frequency of 7GHz is available. With the Surface Mount, it is easy to install this electric component on the panel. There should be 2.7V~3.3V provided with this RF synthesizer. The temperature should be set at -40°C~85°C to ensure reliable performance. There are several logic levels in Clock logic that can be used with this clock generator. It has been classified as a Clock/Frequency Synthesizer (RF) electronic part, which means that it is a semiconductor. It is a 20-bit IC that is designed for microprocessors specifically. According to the base part number, its related parts can be founded. PF synthesizers is equipped with 20 pins. There is a maximum supply voltage of 3V that clock generator can handle. Fundamentally, this is a kind of PLL or Frequency Synthesis Circuits clock PLL. The output frequency can be amplified as high as possible with its 2 signal outputs. Time clock generator requires a supply current of 17mA to fully function.
ADF4107BCPZ-REEL Features
Available in the 20-WFQFN Exposed Pad, CSP
Supply voltage of 3V
Operating supply voltage of 3V
ADF4107BCPZ-REEL Applications
There are a lot of Analog Devices Inc. ADF4107BCPZ-REEL Clock Generators applications.
- Myriad digital applications
- Set-top boxes
- Microwave point-to-point systems
- Digital HDTV systems
- Signal analyzer
- Signal demodulation
- Microwave radio
- Mechanical devices
- Local oscillators (LOs)
- Jitter reduction