ADF4002BRUZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Clock/Frequency Synthesizer (RF), Phase Detector |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADF4002 |
| Output | Clock |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 3V |
| Power Supplies | 3V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 5mA |
| Frequency (Max) | 400MHz |
| Supply Current-Max (Isup) | 6mA |
| Input | CMOS, TTL |
| Ratio - Input:Output | 2:1 |
| PLL | Yes with Bypass |
| Differential - Input:Output | Yes/No |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADF4002BRUZ-RL7 Overview
A clock integrated circuit is packaged in a Tape & Reel (TR)-shaped package because it is for use as a clock. The 16-TSSOP (0.173, 4.40mm Width) package embeds this Clock PLL. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. There are a total of 16 terminations in this file. For this clock generator ic, a voltage of 3V is required. There is a Clock PLL called CMOS, TTL which is designed to be the input to this clock generator. A clock-based RF synthesizer that provides a max frequency of 400MHz is available. Thanks to the Surface Mount, this electric component can easily be installed on a panel. Keeping the supply voltage for this frequency synthesizer above 2.7V is recommended for safety reasons. As long as there are 2.7V~3.3V supply voltages provided, clock generator ic should work. The temperature should be set at -40°C~85°C to ensure reliable performance. I would like to present to you a frequency synthesizer that is compatible with Clock logic levels. This electronic component is usually classified as a Clock/Frequency Synthesizer (RF), Phase Detector component. In particular, this clock PLL is designed to be used with microprocessors. The related electrical components for the base part number ADF4002 can be found below. The clock PLL has 16 pins that are available. The supply voltage should be maintained at 3V for high efficiency. The clock PLL is generally classified as a PLL or Frequency Synthesis Circuits device. Clock PLL is configured with 1 output. For the clock time generator to function properly, 5mA of supply current must be provided. Time clock generator supply currents should not exceed 6mA.
ADF4002BRUZ-RL7 Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 3V
ADF4002BRUZ-RL7 Applications
There are a lot of Analog Devices Inc. ADF4002BRUZ-RL7 Clock Generators applications.
- PCI express cards
- Digital HDTV systems
- Radiotelephones
- Automatic control system test
- Cable television converter boxes
- Telecommunication systems
- Main oscillator in receiver
- Wireless base station for LTE, LTE-advanced
- Digital switching systems
- Instrument